Free Delivery on all orders over £99*

Single 2ft T8 LED Ready Non-Corrosive Batten Fitting IP65 - Grey

£1599
The RRP is the manufacturer's recommended retail price of the item.
Limited Stock
We are an Independent UK Company
Price match. Found it cheaper? Contact us
Trade Discount Available
Description

The Knightsbridge NCLB22 is a 653mm single T8 LED-ready batten fitting housed in a grey polycarbonate body with an IP65-rated seal against dust and water jets. The fitting accepts one 2ft (600mm) T8 LED tube and comes pre-wired without a ballast or driver, designed exclusively for use with self-ballasted T8 LED tubes that connect directly to 230V mains.

Built for industrial and commercial environments where moisture, dust and impact are daily concerns — warehouses, workshops, garages, cold stores, covered car parks, agricultural buildings — the polycarbonate body and prismatic diffuser resist cracking under impact and maintain the IP65 seal even after repeated knocks. The fitting mounts to a ceiling or wall using two fixing points spaced 590mm apart, with cable entry via knock-out glands on either end cap.

The prismatic diffuser spreads light output evenly across a wide beam, reducing harsh shadows under the tube whilst maintaining enough light transmission for task visibility. The grey polycarbonate finish blends into industrial settings without drawing attention, and the impact-resistant construction handles the kind of rough treatment common in working environments where fittings are knocked by ladders, trolleys and building materials.

LED tubes are sold separately. The fitting is Class I and requires an earth connection. Dimming capability depends on whether the chosen T8 LED tube supports dimming — the fitting itself imposes no restriction but provides no active dimming circuitry.

Specification
Length 653 mm
Width 129 mm
Projection 90 mm
Construction Polycarbonate
Finish Grey
Class I
IP Rating IP65
Primary Voltage 230V 50Hz
Diffuser Prismatic
Lamp Technology LED
Lamp Base T8
Lamp Included No
Dimmable Lamp dependent
Warranty 3
Downloads

Product Specification Sheet

Product Manual

Frequently Asked

What T8 LED tube does it take?

The fitting takes one 2ft (600mm) T8 LED tube with a self-ballast (also called direct-to-mains or ballast-bypass tubes). The fitting has no ballast or driver inside — the tube connects directly to 230V. Standard fluorescent T8 tubes will not work.

Is it suitable for outdoor use?

The IP65 rating protects against dust and water jets, making it suitable for covered outdoor areas like car ports, loading bays and canopies. It is not rated for full exposure to rain or submersion.

Can it be dimmed?

Dimming depends entirely on whether the T8 LED tube you install supports dimming. The fitting itself has no dimming circuitry — it passes mains voltage directly to the tube. If the tube is dimmable, pair the fitting with a compatible wall dimmer rated for LED loads.

How is the diffuser removed for tube replacement?

The polycarbonate diffuser clips onto the body and is held by spring clips at each end. Push the clips inward to release the diffuser, then lift it away to access the tube. Re-clip the diffuser after replacing the tube.

Shipping & Returns

Free worldwide delivery

Free worldwide delivery on all orders over £99. International orders for third-party brand products may be subject to an additional courier surcharge based on volumetric weight, particularly on larger lighting fixtures — if a surcharge applies, our team will email you with the amount before dispatch and you can proceed or cancel for a full refund. See full delivery terms.

Returns

30-day returns window from delivery. As all our products are electrical or lighting goods, returned items must be inspected and recertified by a qualified electrician before resale — the cost of this inspection (25–40% of the item value) is deducted from your refund. Customers pay return shipping. Made-to-order, special-order and clearance items cannot be returned. See full returns policy.

Recommended For You

    Sophisticated Style

    Timeless Design, Effortless Elegance

    Discover lighting that blends refined design with approachable luxury. Each piece showcases thoughtful detailing and timeless character, creating a lasting impression in any space.

    Craftsmanship

    Crafted With Care & Quality

    Each piece is thoughtfully built with expert precision and refined finishes, celebrating the art of craftsmanship while ensuring every detail meets the highest standards of quality.

    Performance

    Innovative Illumination

    Our lighting incorporates advanced technology to deliver exceptional brightness and energy efficiency, offering both function and style for contemporary living.

    Effortless Upkeep

    Lighting That Lasts

    Designed for long-term reliability, our fixtures resist wear and maintain their brilliance over time, providing consistent illumination with minimal maintenance.

    Confidence

    Warranty You Can Trust

    Our collection is backed by warranties ranging from 1 to 5 years, giving you lasting peace of mind and assurance in the quality and reliability of every product.

    Luxury Delivered

    Free Worldwide Shipping

    Enjoy complimentary, secure delivery anywhere in the world on orders over £99, simply order and we’ll handle the rest.

    You Might Also Like

    Our Reviews

    From first click to final installation, our customers share how Niori lights up their spaces. Read their words and envision what’s possible for yours.

    Featured Projects

    Step into our portfolio and see how we transform homes, restaurants, and commercial spaces and more, worldwide. Click here for a closer look at our latest projects.

    Description

    The Knightsbridge NCLB22 is a 653mm single T8 LED-ready batten fitting housed in a grey polycarbonate body with an IP65-rated seal against dust and water jets. The fitting accepts one 2ft (600mm) T8 LED tube and comes pre-wired without a ballast or driver, designed exclusively for use with self-ballasted T8 LED tubes that connect directly to 230V mains.

    Built for industrial and commercial environments where moisture, dust and impact are daily concerns — warehouses, workshops, garages, cold stores, covered car parks, agricultural buildings — the polycarbonate body and prismatic diffuser resist cracking under impact and maintain the IP65 seal even after repeated knocks. The fitting mounts to a ceiling or wall using two fixing points spaced 590mm apart, with cable entry via knock-out glands on either end cap.

    The prismatic diffuser spreads light output evenly across a wide beam, reducing harsh shadows under the tube whilst maintaining enough light transmission for task visibility. The grey polycarbonate finish blends into industrial settings without drawing attention, and the impact-resistant construction handles the kind of rough treatment common in working environments where fittings are knocked by ladders, trolleys and building materials.

    LED tubes are sold separately. The fitting is Class I and requires an earth connection. Dimming capability depends on whether the chosen T8 LED tube supports dimming — the fitting itself imposes no restriction but provides no active dimming circuitry.

    Specification
    Length 653 mm
    Width 129 mm
    Projection 90 mm
    Construction Polycarbonate
    Finish Grey
    Class I
    IP Rating IP65
    Primary Voltage 230V 50Hz
    Diffuser Prismatic
    Lamp Technology LED
    Lamp Base T8
    Lamp Included No
    Dimmable Lamp dependent
    Warranty 3
    Downloads

    Product Specification Sheet

    Product Manual

    Frequently Asked

    What T8 LED tube does it take?

    The fitting takes one 2ft (600mm) T8 LED tube with a self-ballast (also called direct-to-mains or ballast-bypass tubes). The fitting has no ballast or driver inside — the tube connects directly to 230V. Standard fluorescent T8 tubes will not work.

    Is it suitable for outdoor use?

    The IP65 rating protects against dust and water jets, making it suitable for covered outdoor areas like car ports, loading bays and canopies. It is not rated for full exposure to rain or submersion.

    Can it be dimmed?

    Dimming depends entirely on whether the T8 LED tube you install supports dimming. The fitting itself has no dimming circuitry — it passes mains voltage directly to the tube. If the tube is dimmable, pair the fitting with a compatible wall dimmer rated for LED loads.

    How is the diffuser removed for tube replacement?

    The polycarbonate diffuser clips onto the body and is held by spring clips at each end. Push the clips inward to release the diffuser, then lift it away to access the tube. Re-clip the diffuser after replacing the tube.

    Shipping & Returns

    Free worldwide delivery

    Free worldwide delivery on all orders over £99. International orders for third-party brand products may be subject to an additional courier surcharge based on volumetric weight, particularly on larger lighting fixtures — if a surcharge applies, our team will email you with the amount before dispatch and you can proceed or cancel for a full refund. See full delivery terms.

    Returns

    30-day returns window from delivery. As all our products are electrical or lighting goods, returned items must be inspected and recertified by a qualified electrician before resale — the cost of this inspection (25–40% of the item value) is deducted from your refund. Customers pay return shipping. Made-to-order, special-order and clearance items cannot be returned. See full returns policy.