Silk String Lampshade Amber Cream - 19/30cm x 19.5cm

This Mantra silk string lampshade forms a tapered drum from precision-wrapped silk threads, moving from a 19cm base diameter to a 30cm top diameter across a 19.5cm height. The amber-cream tone is woven into the silk itself rather than dyed onto fabric, so the colour remains consistent when lit and unlit. The silk threads run vertically in parallel, creating a smooth ribbed surface without visible seams or joins.

Designed for table lamps and floor lamps with standard ES (E27) or BC (B22) fittings, the shade fits onto a duplex ring fitting (also known as a spider fitting) that sits inside the shade's top aperture. The 30cm top diameter works well on lamp bases between 20-35cm wide, balancing the proportions of bedside tables, side tables and console positions. The amber-cream hue casts a warm golden glow when paired with 2700K-3000K LED or halogen bulbs.

The silk threads are held under tension on a steel wire frame, giving the shade structural rigidity at 0.4kg without requiring internal stiffeners that would create shadow lines. The vertical alignment of the threads diffuses light evenly across the shade's surface, avoiding the patchwork effect of fabric panels. The amber-cream finish pairs naturally with brass, bronze, wood and warm metallic lamp bases in traditional, mid-century and contemporary interiors.

What fitting type does this shade require?

The shade uses a duplex ring (spider) fitting that sits inside the top aperture. This fitting type is standard on most table and floor lamps with ES (E27) or BC (B22) bulb holders. Measure your lamp's fitting before ordering to confirm compatibility.

What size lamp base does it suit?

The 30cm top diameter pairs well with lamp bases between 20-35cm wide. On narrower bases the shade may appear oversized; on wider bases it may look undersized. For bedside tables, a base around 25-30cm wide typically balances well.

Can the silk be cleaned?

Dust regularly with a soft brush attachment on a vacuum cleaner set to low suction, or use a clean microfibre cloth. Avoid water, solvents or fabric cleaners as they can mark or discolour the silk threads permanently.

What bulb wattage is recommended?

Use LED or halogen bulbs up to 60W equivalent. Higher wattages may cause excessive heat buildup near the silk, which can yellow the material over time. A 6-10W LED in 2700K-3000K gives warm ambient light without overheating the shade.