Description
A small decorative accessory finished in satin nickel, sized to sit with shades of 17cm in height. It is slender rather than showy, with a soft grey sheen that catches light without flaring, and its shallow projection keeps it close and tidy against the clip. We think of it as the finishing detail on a shade that would otherwise read as plain: a quiet bit of trim that lifts the profile and ties the clip back to the metal below. The shade is not included: the photographs show the clip on a plain drum; the lamp shades are sold separately.
It comes into its own on table and floor lamps where the clip and the base are not quite speaking to each other, and on smaller fittings where a nickel stem deserves an echo higher up. Bedrooms, studies and sitting rooms are the usual homes for it, since these are the rooms where lamps are chosen by eye rather than by output. It suits anyone assembling a lamp piece by piece. We reach for it when a customer has settled on the clip and wants the metal to look deliberate.
The satin finish is even and low in shine, closer to brushed pewter than to bright chrome, and it wears fingerprints better than a polished surface would. Keeping it looking well is a matter of an occasional wipe with a dry lint-free cloth; skip sprays and cream cleaners, which will dull the nickel over time. There is nothing electrical here, so light comes from the fitting it joins. It carries a one year warranty. We stock the same piece in antique brass, chrome, satin black and bronze at this height, with shorter and taller versions for other shades, so a set can be matched across several lamps in one room.
Specification
| Colour |
Satin Nickel |
| Weight |
0.02KG |
| Width |
50mm |
| Height |
170mm |
| Projection |
10mm |
| Materials Used |
Stainless Steel |
| Lamp Cap |
Non-Electric |
| Protection Class |
Non-Electric |
| IP Rating |
IP20 |
| Warranty |
1yr |
| UKCA/CE |
Yes |
| Pieces Included |
1 |
| Unassembled |
No |
| Installation |
Clip-on Item |
| Product Care |
(1) Wipe clean with a dry cloth, do not use any cleaning detergents, do not use rough or coarse material to clean. (2) Ensure light is not illuminated when cleaning. |
| Country of Origin |
China |
Frequently Asked
What size of shade is this meant for?
It is intended for shades measuring 17cm in height. The piece itself stands 170mm tall and 50mm wide, with a projection of 10mm.
Is it wired or electrical in any way?
No. It is a non-electric accessory, so there is no lamp, socket or wiring involved; the light comes from the fitting it is paired with.
How should I clean it?
A dry, lint-free cloth is all it needs. Avoid sprays, creams and abrasives, as these can take the softness out of the satin nickel.
Which other finishes are available in this height?
We also stock the 17cm version in antique brass, chrome, satin black and bronze.
Are there versions for other shade heights?
Yes. The same accessory is offered for 15cm and 22cm tall shades, in a similar spread of finishes.
What warranty does it carry?
One year.