Description
A slim vertical trim in satin nickel, made to dress the edge of a shade and give it a crisp line of metal. It measures 15cm tall and 5cm across, with a shallow projection that keeps it close against the clip rather than standing proud. The satin finish is low in shine, nearer brushed steel than mirror chrome, so it reads as quiet detail rather than bright hardware. There is no wiring and no lamp of its own; it is a finishing part, and we sell it as one. The shade is not included: the photographs show the clip on a plain drum; the lamp shades are sold separately.
It is sized for shades of the same height, and we would use it on a bedside pair, a console lamp in a hallway, or a table lamp in a sitting room where the clip has gone a little plain. Because it picks up the metal of the base or the bracket below, it is a tidy way to tie a lamp together without changing the clip itself. Satin nickel keeps company well with brushed steel, cool greys and pale plaster tones, and it is calm enough to repeat across several lamps in one room.
The piece is light in the hand and finished evenly across its face, so the sheen stays consistent along the length. To keep it looking right, run a dry duster over it now and then and leave metal polishes and cream cleaners in the cupboard, since they can flatten a satin surface quickly. It carries a one year warranty. We stock the same trim in antique brass, chrome, satin black and bronze for shades of this height, and in taller versions for larger shades, so a set of lamps can be matched or deliberately mixed. Light comes from the fitting the clip belongs to, not from this.
Specification
| Colour |
Satin Nickel |
| Weight |
0.02KG |
| Width |
50mm |
| Height |
150mm |
| Projection |
10mm |
| Materials Used |
Stainless Steel |
| Lamp Cap |
Non-Electric |
| Protection Class |
Non-Electric |
| IP Rating |
IP20 |
| Warranty |
1yr |
| UKCA/CE |
Yes |
| Pieces Included |
1 |
| Unassembled |
No |
| Installation |
Clip-on Item |
| Product Care |
(1) Wipe clean with a dry cloth, do not use any cleaning detergents, do not use rough or coarse material to clean. (2) Ensure light is not illuminated when cleaning. |
| Country of Origin |
China |
Frequently Asked
What size of shade is this made for?
It is proportioned for shades 15cm tall, so measure the height of your shade rather than its diameter. Taller shades are served by the 17cm and 22cm versions of the same trim.
What are its measurements?
It stands 150mm tall and 50mm wide, with a projection of only 10mm, so it stays tight to the clip.
Is it an electrical item?
No. It is non-electrical, with no lamp holder and nothing to wire, so the light always comes from the host fitting.
How should I clean it?
A dry, soft duster is all it wants. Avoid abrasive pads, solvents and metal polish, as these can mark or dull a satin nickel surface.
Is it covered by a warranty?
Yes, it carries a one year warranty.
Which finishes come in this height?
In the 15cm size we hold satin nickel, antique brass, chrome, satin black and bronze.