Seraphis LED Large Alabaster Ring Chandelier - Brushed Brass

The Seraphis is an 800mm alabaster ring chandelier built around a continuous circular band carved from natural Spanish alabaster, suspended horizontally on fine cables from a brushed brass canopy. An integrated 3000K LED runs inside the ring, casting warm light evenly through the 60mm stone section so the alabaster itself becomes the diffuser. The design is deliberately pared back, leaving the stone and its veining as the focal element.

Designed for dining tables, kitchen islands, entrance halls and stairwell voids with sufficient ceiling height, the Seraphis works best where its full circular form can be read from below and from a distance. The 800mm diameter suits dining tables of 1.6m or longer and kitchen islands of similar scale, typically hung 700-800mm above the surface. The brushed brass canopy fits standard UK ceiling roses and the suspension cables can be shortened on installation to set the drop.

Each ring is carved from solid alabaster, so the veining, mineral density and tonal variation flow organically around the full circumference and differ between individual pieces. Softly honed surfaces keep the internal structure of the stone visible, producing layered transitions between translucent and opaque areas when the LED is lit. The consistent 60mm section gives the band a precise sculptural profile, and the brushed brass details on the canopy and cable terminations add a warm metallic counterpoint to the pale stone.

What size table or island does the Seraphis suit?

At 800mm in diameter, the Seraphis suits dining tables of around 1.6m or longer and kitchen islands of similar scale. As a guide, hang the ring 700-800mm above the surface so the lit band sits comfortably within the eyeline without obstructing views across the table.

Is the LED dimmable?

The integrated LED runs at 3000K on 230V mains. Dimmer compatibility depends on the specific dimmer model and driver — please contact us before pairing with a dimmer to confirm suitability for this fitting.

Will each ring look the same?

No. Each ring is carved from natural Spanish alabaster, so the veining, mineral inclusions and tonal variation differ between individual pieces. Areas of higher density read as softer clouding when the LED is lit. This natural variation is a feature of the stone, not a defect.

How is the alabaster cleaned?

Alabaster is porous and softer than marble. Wipe gently with a dry, soft microfibre cloth. For more stubborn marks a barely-damp cloth with distilled water is acceptable, but avoid soaking the stone and do not use household sprays, polishes or chemical cleaners.