Saona Medium Round LED Flush Ceiling Light 24W 3000K - White

The Saona Medium is a 225mm round flush ceiling light with a matt white polycarbonate diffuser and an integrated 24W LED delivering 2040 lumens at 3000K warm white. The fitting sits 40mm from the ceiling, making it suitable for rooms with ceiling heights from 2.2m upwards where a low-profile light source is needed without losing output.

Designed for bedrooms, hallways, small living rooms and kitchens where general overhead lighting is required, the Saona provides even ambient light across a 10-15m² floor area. The 110° beam angle spreads light outward from the ceiling without creating a focused hot-spot directly beneath the fitting, so rooms feel evenly lit rather than pooled. The matt white finish integrates cleanly with white or magnolia ceilings, and the shallow 40mm projection keeps the fitting visually recessed.

The polycarbonate diffuser hides the LED array behind a smooth translucent surface, so the light source itself is not visible when the fitting is switched on. At 0.97kg the Saona is light enough to mount onto standard plasterboard ceilings with the correct fixings. The integrated LED eliminates the need to buy or replace bulbs, and the 3000K colour temperature provides warm white light without the yellow cast of older incandescent fittings or the blue-white tone of cooler LEDs.

Mantra produces the Saona in three sizes — this medium 225mm version sits between the small 165mm and large 330mm models. The medium size suits standard UK bedrooms and hallways where a compact fitting is needed but the small version would not provide enough output. The fitting is not dimmable, so it operates at full 2040lm output when switched on.

Is the Saona Medium dimmable?

No. The integrated LED operates at fixed output when switched on. If dimming is required, consider a different fitting with dimmable LED compatibility.

What room size does it suit?

The 2040lm output and 110° beam angle suit rooms of approximately 10-15m² floor area — typical UK single bedrooms, hallways, bathrooms and small home offices. For larger rooms the Saona Large (330mm, 3600lm) provides more output.

Can it be used in bathrooms?

The specification does not list an IP rating, so this fitting is not certified for use in bathroom zones where moisture protection is required. For bathrooms, choose a flush ceiling light with IP44 or IP65 rating.

How is the fitting installed?

The Saona mounts directly onto the ceiling using screws through the baseplate, which also houses the mains connection terminals. The fitting weighs 0.97kg and can be mounted on plasterboard ceilings using appropriate cavity fixings. Standard mains wiring connects to the terminal block inside the baseplate before the diffuser is clipped into place.