Saona Extra Small Round LED Flush Ceiling Light 8W 3000K - White

The Saona Extra Small is a 120mm flush ceiling light with an integrated 8W 3000K LED housed in a matt white polycarbonate body. At just 40mm in height from the ceiling, the fitting sits close to the surface, providing ambient light without projecting into rooms with low ceilings or tight clearances. The 680lm output and 110° beam angle deliver even light distribution across small areas without creating hotspots.

Designed for hallways, en-suites, small landings, cupboards, utility rooms, and compact bedrooms where ceiling height is limited or overhead fittings need to stay unobtrusive. The fitting works in rooms with ceilings as low as 2.1m, where a larger pendant or semi-flush would dominate the space. The 120mm diameter keeps the visual footprint small while still providing enough light for safe navigation and task visibility in areas up to 4m².

The matt white finish on the polycarbonate body reflects ambient light from the room back up to the ceiling, softening the overall appearance when the fitting is switched off. When lit, the 3000K colour temperature produces warm white light that pairs well with neutral and warm-toned interiors. The polycarbonate diffuser is impact-resistant and lighter than glass equivalents, reducing strain on ceiling fixings. The fitting is non-dimmable and draws 8W on standard 230V mains.

What ceiling height is needed for this fitting?

The 40mm projection from the ceiling makes the Saona suitable for low-ceiling rooms from 2.1m upwards. The fitting sits flush to the ceiling surface, so overhead clearance is not an issue in typical residential spaces.

Is the LED replaceable?

No. The LED is integrated into the fitting and not user-replaceable. The LED is rated for 25,000+ hours of operation, which translates to approximately 10-15 years of typical domestic use before any degradation in light output occurs.

What size room does 680lm light?

680lm at 3000K provides sufficient ambient light for rooms up to approximately 4m² (a 2m x 2m space). For larger areas, multiple Saona fittings can be spaced across the ceiling, or a higher-output model from the Saona range would be more appropriate.

Can it be used in bathrooms?

The fitting carries no stated IP rating in the specification, so it is not designed for direct exposure to moisture or steam. It may be used in bathrooms outside IP-rated zones (typically zone 3, more than 600mm from a water source), but should not be installed above showers, baths, or basins.