Description
The Sally is an 85mm diameter recessed LED downlight with an integrated 11W COB LED module set into a die-cast aluminium white trim ring. The recessed fitting sits flush into plasterboard or panel ceilings, with the white ring forming a clean circular aperture around the central light source. The 3000K colour temperature produces warm white light suitable for ambient and accent lighting in residential and commercial interiors.
Designed for installation in kitchens, hallways, bathrooms (excluding zones 0-2 due to IP40 rating), retail spaces and offices, the Sally fits standard UK ceiling joists and void depths. The die-cast aluminium construction provides rigidity during installation and long-term dimensional stability once fitted, preventing the sagging or warping that can occur with lower-grade plastic trims. The 11W output from a single COB LED chip delivers functional light levels without the multiple diodes and shadowing patterns seen in cheaper LED arrays.
The IP40 rating protects the LED module and driver from solid objects above 1mm and incidental dust ingress, making the fitting suitable for dry internal environments. The white painted finish on the trim ring integrates cleanly with white ceilings, reducing the visual boundary between fitting and ceiling plane. The non-dimmable driver runs directly from 230V mains via a standard ceiling connection, requiring no additional control gear or transformers.
COB (chip-on-board) LED technology concentrates multiple LED chips onto a single substrate, producing higher lumen density and a more uniform light distribution than segmented LED arrays. This makes COB downlights particularly effective for task lighting over kitchen worktops and desks where consistent illumination without hotspots is required. The fixed orientation suits general downlighting rather than directional accent work.
Specification
| Diameter (mm) |
85 |
| Dimmable |
No |
| Number Of Bulbs |
1 |
| Bulb Type |
LED |
| Colour Temperature |
3000K |
| IP Rating |
IP40 |
| Warranty |
5 Years |
Frequently Asked
What ceiling void depth is needed?
Most recessed LED downlights of this type require a minimum void depth of 80-100mm above the ceiling to accommodate the LED driver and heat dissipation. Check the installation instructions for the exact requirement before cutting the ceiling aperture.
Can it be used in a bathroom?
The IP40 rating provides dust protection but no water ingress protection. This makes the Sally suitable for bathrooms outside zones 0, 1 and 2 — typically ceiling positions more than 2.25m from a bath or shower cubicle. It is not suitable for installation directly above a bath or within a shower enclosure.
Is the LED replaceable?
The 11W COB LED is integrated into the fitting and is not user-replaceable. The LED module is rated for approximately 25,000-30,000 hours of operation, which equates to 10-15 years at typical residential usage levels before luminosity begins to degrade.
What beam angle does it provide?
COB LED downlights typically provide a beam angle between 90° and 120°, producing a wide wash of light suitable for general ambient illumination rather than narrow accent lighting. The exact beam angle for this model is not stated in the specification — contact us if this detail is critical for your installation.