Description
Three heads sit along a slim rectangular bar, each able to turn and tilt so the light lands where you want it rather than where the fitting happens to point. The bar runs 48cm end to end and keeps a low profile, so it reads as a quiet line overhead instead of a cluster of separate fittings. Matt white covers the bar and the heads alike, which helps it settle into a pale ceiling. Each head takes a GU10 lamp of up to 10W, and a small reflector lamp gives the tidiest pool of light.
We would use it over a worktop, along a run of shelves, or above a desk where a pendant would sit in the way. It works on a wall too, angled up a chimney breast or across a picture, and the swivel means one bar can cover two jobs at once. Wire it to a dimmer, fit dimmable lamps, and it will pull back for evenings. Keep it to dry rooms indoors, so a hallway, kitchen or study rather than anywhere steam gathers.
The heads move on a firm joint that holds the angle once set, and the matt surface is forgiving of fingerprints in a way gloss never is. For cleaning, take the power off, wait until the lamps are cold, then run a dry cloth along the bar and around each head; a cotton bud gets the dust out of the joints. It carries a one year warranty. We stock the same linear bar in matt black and in satin gold with matt black, and there is a shorter two head version if the space is tight, plus a round three head plate for the middle of a small room. Lamps are not included.
Specification
| Colour |
Matt White |
| Ceiling Mountable |
Yes |
| Wall Mountable |
Yes |
| Weight |
1.18KG |
| Length |
480mm |
| Width |
75mm |
| Height |
128mm |
| Materials Used |
Aluminium, Iron |
| Adjustable Height |
No |
| Energy Class |
A++ to B |
| Max Energy Class |
A++ |
| Min Energy Class |
B |
| Lamp |
3 x GU10 10W max (lamps not included) |
| Lamp Cap |
GU10 |
| Recommended Lamp |
LED (50mm Reflector) |
| Light Distribution |
Down |
| Protection Class |
Class 1 - Earth Connection Required |
| Total Power Consumption |
Dependent On Lamps Used (±5%) |
| Input Voltage |
220-240V~50/60Hz |
| Dimmable |
Yes - Dimmable Lamps Required |
| Dimmer Included |
No |
| IP Rating |
IP20 |
| Warranty |
1yr |
| UKCA/CE |
Yes |
| Pieces Included |
1 |
| Installation |
Requires Installation By Qualified Electrician |
| Sloped Ceiling Compatible |
Yes |
| Sloped Ceiling Adapter Required |
No |
| Product Care |
(1) Wipe clean with a dry cloth, do not use any cleaning detergents, do not use rough or coarse material to clean. (2) Ensure light is not illuminated when cleaning. |
| Country of Origin |
China |
Frequently Asked
What size lamps should I fit?
GU10 lamps rated up to 10W each, and a 50mm reflector type suits the heads best. Three are needed in total.
Can I dim it?
Yes, on a suitable dimmer switch with dimmable GU10 lamps. Neither the lamps nor a dimmer come with it.
How much space does it need?
The bar is 480mm long and 75mm wide, and it stands 128mm from the surface it is fitted to, including the heads.
Can it go on a wall as well as a ceiling?
Yes, it is made for either, and the tilting heads let you aim the light in both positions.
Is it suitable for a bathroom?
No. It is rated for ordinary dry interiors only, so keep it out of bathrooms and away from splashes.
Do the heads stay where I put them?
They do. Each one swivels and tilts on a joint stiff enough to hold its angle after adjustment.