Description
Two spot heads sit on a slim linear plate, each tilting and turning so the light lands where you want it. The satin gold bodies are paired with matt black, a quiet contrast that reads as warm rather than brassy from across a room. At 250mm end to end this is a small fitting that keeps close to the ceiling, and each head takes a GU10 lamp. Nothing about it shouts: the outline is a plain rectangle and the interest comes from the finish.
We reach for a pair like this where a single central light leaves the edges of a room flat: above a kitchen worktop, along a short hallway, over a bookcase or a run of framed prints. The narrow plate means it can be aimed across a wall without the fitting itself becoming the thing you look at. Angled heads also earn their keep in a home office or a snug, and with suitable lamps and a compatible dimmer the pair can be brought down for the evening. Wiring is for indoor rooms on ordinary household mains.
The satin finish is soft rather than mirror bright, and the black detail carries through the heads as well as the plate. Each head is rated for an LED reflector lamp up to 10W, and lamps are bought separately. For cleaning, wait until the heads are cold, then lift dust with a dry cloth and keep polish and household sprays off the gold. It carries a one year warranty. We stock the same bar in matt black and in matt white, and there is a longer version in this satin gold and matt black pairing for a wider stretch of worktop or wall.
Specification
| Colour |
Satin Gold |
| Second Colour |
Matt Black |
| Weight |
0.75KG |
| Length |
250mm |
| Width |
75mm |
| Height |
128mm |
| Materials Used |
Aluminium |
| Energy Class |
A++ to E |
| Max Energy Class |
A++ |
| Min Energy Class |
E |
| Lamp |
2 x GU10 10W max (lamps not included) |
| Lamp Cap |
GU10 |
| Recommended Lamp |
LED (50mm Reflector) |
| Light Distribution |
Multiple Directions |
| Protection Class |
Class 1 - Earth Connection Required |
| Total Power Consumption (W) |
Dependent On Lamps Used (±5%) |
| Input Voltage (V) |
100-240V~50/60Hz |
| Dimmable |
Yes - Suitable Lamps & Dimmer Required |
| Dimmer Included |
No |
| IP Rating |
IP20 |
| Warranty |
1yr |
| UKCA/CE |
Yes |
| TUV |
Yes |
| EMV/EMC |
Yes |
| Pieces Included |
1 |
| Unassembled |
No |
| Installation |
Requires Installation By Qualified Electrician |
| Sloped Ceiling Compatible |
Yes |
| Sloped Ceiling Adapter Required |
No |
| Product Care |
(1) Wipe clean with a dry cloth, do not use any cleaning detergents, do not use rough or coarse material to clean. (2) Ensure light is not illuminated when cleaning. |
| Country of Origin |
China |
Frequently Asked
Which lamps does it take?
Each head takes a GU10 lamp, and an LED reflector of 50mm diameter suits it best. The maximum is 10W per head, and lamps are not included.
Can it be dimmed?
Yes, provided you fit dimmable lamps and pair them with a compatible dimmer. No dimmer is supplied with the fitting.
How much room does it need?
It measures 250mm long by 75mm wide, and stands 128mm from the ceiling with the heads in a neutral position. Allow a little extra so the heads can swing without catching.
Is it suitable for a bathroom or outdoors?
No. It is rated IP20, so it belongs in dry rooms indoors, away from splashes and weather.
How should I look after the satin gold?
A dry or barely damp cloth is all it needs. Avoid abrasive creams, metal polish and solvent cleaners, as these can dull the satin sheen.
Are there other versions in this range?
Yes. The same two light bar comes in matt black and matt white, and there is a longer linear spotlight in the satin gold and matt black pairing.