Description
The Sabik is a low-voltage LED step light that runs on 12V DC and draws just 0.8W, giving a soft 13 lumen output in a warm white 3000K tone. It recesses into the wall to mark stairs, treads and skirting lines without drawing the eye to the fitting itself. The compact 75 by 75 mm square face sits flush, casting a gentle downward wash that defines each step rather than lighting a whole room. North American buyers will recognise this format as a recessed stair or step light wired off a 12V transformer.
The Sabik suits indoor staircases, hallways and landings where a guiding glow underfoot is more useful than overhead brightness. At 13 lumens its job is wayfinding, so coverage is best judged by how clearly it picks out the edge of a tread or the line of a passage rather than by any floor area figure. Spaced evenly down a flight, several units mark a clear path in the dark while keeping ambient light low. Because it is rated IP20, the Sabik is for dry interior locations only and should be kept away from bathrooms, porches and any outdoor or damp position.
Built with a polished stainless steel face and plastic body, the fitting carries a black finish and a clean square profile that recesses into the wall via the supplied housing. It runs on a 12V DC supply, so it needs a suitable low-voltage transformer rather than connecting direct to mains. The integrated LED is rated for 50,000 hours and the warm white 3000K colour is fixed; the unit is not dimmable. The Sabik step light belongs to a wider Sabik range, so matching units can be specified across a stairwell for a consistent look.
Specification
| Power |
0.8W |
| Voltage |
12 DC |
| Luminous flux |
13 lm |
| Efficiency |
16 lm/W |
| Colour temperature |
3000K |
| Colour rendering (CRI) |
Ra 80 |
| IP rating |
IP20 |
| Dimmable |
No |
| Mounting |
Recessed Mount In The Wall |
| Lifespan |
50,000 hours |
| Shape |
Square |
| Dimensions |
75 × 23 × 75 mm |
| Weight |
92 g |
| Material |
Polished Stainless Steel, Plastic |
| Finish |
Black |
Downloads
Frequently Asked
Does the Sabik need a 12V transformer?
Yes. It runs on a 12V DC supply rather than mains voltage, so it must be wired through a suitable low-voltage transformer or driver. Size the transformer to cover the total wattage of every step light on the circuit, allowing for the 0.8W draw of each unit.
Can the Sabik be used outdoors?
No. It carries an IP20 rating, which means dry indoor use only. Keep it clear of bathrooms, porches, gardens and any damp or exposed location, and instead choose a higher-rated outdoor fitting for those areas.
How is the Sabik installed?
It is a recessed wall fitting, so it drops into a housing set into the wall to sit flush with the surface. This makes it well suited to staircases and hallways where a low, glare-free guiding light is wanted at tread height.
How do I clean the Sabik?
Wipe the polished stainless steel face and surrounding trim with a soft, slightly damp cloth, then dry it off. Avoid abrasive pads or harsh solvents so the finish stays clean, and always isolate the supply before cleaning.