Description
Romendo is a chrome LED bathroom wall light built as a slim bar carrying three round shades, each held on its own small chrome bracket in front of the backplate. The body is steel with a chrome finish, and the shades are plastic in clear with a satin finish, which softens the LEDs into an even glow. It is 45cm long and 7cm high, and stands 12.5cm out from the wall. The LEDs are integrated, so there are no bulbs to buy or change. It is rated IP44, protected from splashing water, which is what lets it go into a bathroom.
It sits best on the wall above a bathroom mirror or basin, where its length spreads light across your face instead of casting shadows from a single point overhead. That makes shaving and make-up far easier. Each of the three lights gives 540lm at 3000K, a warm white that is kind to skin tones and sits comfortably with white tiles, marble or timber vanity units. It suits an en suite, a family bathroom or a cloakroom, and a qualified electrician will confirm the right zone for your room.
Each light draws 7.2W, and the fitting is dimmable, so you can soften it for a late evening bath and bring it back up for the morning. There is no switch on the fitting itself; it is switched at the wall, so it works from a switch on the wall. It runs on 220-240V mains at 50/60Hz and carries energy class F. As a wired-in mains light it is installed by a qualified electrician. The installation instructions come as a download, so it is worth passing them to your electrician when you book the job.
Specification
| Length |
45cm |
| Height |
7cm |
| Projection |
12.5cm |
| Body Material |
Steel |
| Body Colour |
Chrome |
| Shade Material |
Plastic |
| Shade Colour |
Clear, satin finish |
| Light Source |
LED, integrated |
| Wattage |
3 x 7.2W |
| Lumens |
540lm per light (3 lights) |
| Colour Temperature |
3000K |
| Dimmable |
Yes |
| Switch |
None (switched at the wall) |
| IP Rating |
IP44 |
| Protection Class |
Class I |
| Voltage |
220-240V, 50/60Hz |
| Energy Class |
F |
| Weight (packed) |
1.205KG |
Downloads
Installation Instructions (PDF)
Frequently Asked
Can the Romendo wall light go in a bathroom?
Yes. It is rated IP44, which means it is protected from splashing water, and a qualified electrician will confirm the right zone for your bathroom.
Is the Romendo dimmable?
Yes, the fitting is dimmable. It has no switch of its own and is switched at the wall, so you can turn it down for a softer light in the evening.
How bright is each of the three lights?
Each of the three lights gives 540lm and draws 7.2W, with a colour temperature of 3000K, a warm white that works well around a mirror.
Does it need bulbs?
No. The LEDs are integrated into the fitting, so there are no separate bulbs to buy or fit.
How big is the bar?
It is 45cm long and 7cm high, and stands 12.5cm out from the wall, so it sits comfortably over a mirror or basin.
Which materials does it use?
The body is steel with a chrome finish, and the three round shades are plastic in clear with a satin finish.