Description
The Riti is a compact round ceiling light that takes a single GU10 lamp rated up to 10W, running on a standard 220-240V AC mains supply. It mounts to the surface of the ceiling rather than recessing into it, giving a neat cylindrical profile that projects just 110mm from the surface on an 85mm round base. As a surface-fixed GU10 fitting it sits in the same family North American buyers would shop as a small GU10 ceiling spotlight, directing light downward from the lamp you choose. The light output and colour temperature follow the GU10 lamp fitted, so the tone is set by the bulb rather than a built-in board.
The Riti suits hallways, landings, kitchens and home offices where a small, directional point of light is wanted without cutting into the ceiling. Because it is a single GU10 spot, it works well in clusters or rows to build up coverage across a larger room, or as a single accent over a worktop or feature. The brightness depends on the lamp chosen, so coverage is best judged by the GU10 output and beam you fit rather than a fixed figure. Its low projection keeps it tidy under lower ceilings, and the round form pairs cleanly with other minimal fittings.
The body is aluminium alloy in a white finish, with a round shape measuring 85mm in diameter and 110mm tall, weighing 300g. It carries an IP20 rating, so it is for dry indoor use only and should be kept out of bathrooms, porches and any damp or outdoor location. Mounting is to the ceiling surface, and the GU10 holder lets you swap lamps to set output, colour temperature and dimmability as needed. The Riti range offers further fittings in the same white finish for a consistent look across a space.
Specification
| Power |
max 10W |
| Voltage |
220-240 AC |
| IP rating |
IP20 |
| Mounting |
Ceiling Mounted |
| Cap / base |
GU10 |
| Light source |
PAR16 |
| Shape |
Round |
| Dimensions |
Ø85 × 110 mm |
| Weight |
300 g |
| Material |
Aluminium Alloy |
| Finish |
White |
Downloads
Frequently Asked
Is the Riti dimmable?
The Riti itself has no fixed light board, so dimming depends entirely on the GU10 lamp you fit. Choose a dimmable GU10 bulb paired with a compatible dimmer switch, and the fitting will dim with it. A non-dimmable lamp will run at full output only.
Can the Riti be used outdoors or in a bathroom?
No. It is rated IP20, which means it is suitable for dry indoor rooms only. Keep it clear of bathrooms, showers, porches and any damp or outdoor setting, as it offers no protection against moisture or dust.
What bulb does the Riti take?
It uses a single GU10 lamp of the PAR16 type, rated up to a maximum of 10W. This lets you pick the colour temperature, output and beam angle to suit the room, and swap the lamp later without changing the fitting.
How do I clean the Riti?
Switch it off and let the lamp cool, then wipe the white aluminium body with a soft, dry or slightly damp cloth. Avoid harsh solvents or abrasive cleaners so the finish stays intact, and make sure the fitting is fully dry before switching it back on.