Rifa LED 17.5W Round Ceiling Light Cool White - Black/Gold B/G

The Rifa LED is a round surface-mounted ceiling light running 17.5W from a 220-240V mains supply and putting out 1500 lumens at a 4000K cool white tone. The wide 120 degree beam spreads light evenly across a space rather than throwing it in one direction, so the output washes down and out from the centre. With an efficiency of 86 lm/W and an integrated LED light source, there is no separate bulb to fit or replace. North American buyers will recognise this fixture format as a flush mount LED ceiling light, sitting close to the ceiling line at just 116mm deep.

The 1500 lumen output suits a coverage of around 5 m² at general lighting levels, which makes the Rifa a good fit for a hallway, a small bedroom, an entrance area or a compact landing where a single central fitting handles the whole room. The 400mm diameter gives a generous presence without dominating, and the shallow 116mm depth means it works comfortably under lower ceilings where a pendant would feel cramped. For larger rooms, pairing two of these across the ceiling keeps the light level consistent from wall to wall.

Built from metal with a black and gold finish, the Rifa carries an IP20 rating, so it is intended for dry indoor rooms only and should be kept away from bathrooms and any damp or exposed location. The integrated LED is rated for 25,000 hours of use and the fitting is not dimmable, so it pairs with a standard on/off switch rather than a dimmer. Mounting is to the ceiling surface, and the round profile fits flush against the plaster. This model sits within the wider Rifa range of ceiling lights from Kanlux.

What size room does this suit?

With 1500 lumens at a 4000K cool white tone, the Rifa LED covers around 5 m² at general lighting levels. That makes it well matched to a hallway, a small bedroom, an entrance or a compact landing where one central fitting lights the whole space.

Is this ceiling light dimmable?

No, the Rifa LED is not dimmable and should be used with a standard on/off switch rather than a dimmer. Pairing it with a dimmer would risk flicker or buzzing, so a simple switched circuit is the correct setup.

Does it take a replaceable bulb?

No, the light source is an integrated LED rated for 25,000 hours, so there is no separate bulb to buy or fit. When the LED reaches the end of its life the whole fitting is replaced rather than a single lamp.

How do I clean the fitting?

Wipe the surface gently with a soft, dry or barely damp cloth once the light is switched off and cool. Avoid abrasive cleaners or solvents on the black and gold metal finish, as these can mark the surface.