Description
The Rifa LED is a round flush-fitting ceiling light that runs on an integrated 17.5W LED board, so there is no separate bulb to replace over its life. It puts out 1450 lumens at a fixed 3000K warm white, spread through a wide 120 degree beam that washes a room evenly rather than picking out a single spot. Often described in the US as a flush mount LED ceiling light, it sits close to the ceiling on a 116mm-deep body measuring 400mm across, giving a low, unobtrusive profile.
At 1450 lumens this fitting covers around 5 m² at general lighting levels, which makes it a sensible single source for a hallway, a small bedroom, a study or a utility area, with a couple of units suiting a larger living space. The wide 120 degree spread and modest depth make it well matched to lower ceilings where a hanging fitting would feel cramped, and the warm 3000K tone keeps the light relaxed rather than clinical. It is rated IP20, so it is for dry indoor rooms only and should be kept clear of bathrooms, porches and any outdoor or damp positions.
Built from metal with a grey and gold finish, the Rifa LED is ceiling mounted directly to the surface and wired to a 220-240V AC supply. The LED source is rated for 25,000 hours and the fitting is not dimmable, so it pairs with a standard on/off switch rather than a dimmer circuit. With a CRI of Ra 80 it renders everyday colours faithfully for living and circulation spaces. The Rifa LED range includes further round ceiling fittings if you want a consistent look across several rooms.
Specification
| Power |
17.5W |
| Voltage |
220-240 AC |
| Luminous flux |
1450 lm |
| Efficiency |
83 lm/W |
| Colour temperature |
3000K |
| Colour rendering (CRI) |
Ra 80 |
| Beam angle |
120° |
| IP rating |
IP20 |
| Dimmable |
No |
| Mounting |
Ceiling Mounted |
| Lifespan |
25,000 hours |
| Light source |
LED |
| Shape |
Round |
| Dimensions |
Ø400 × 116 mm |
| Weight |
1.07 kg |
| Material |
Metal |
| Finish |
Grey / Gold |
Downloads
Frequently Asked
What size room does this ceiling light suit?
Putting out 1450 lumens, it covers around 5 m² at general lighting levels. That makes it a good single fitting for a hallway, small bedroom, study or utility room, while a larger living space would benefit from two units.
Is the Rifa LED dimmable?
No, this fitting is not dimmable and should be used on a standard on/off switch. Wiring it to a dimmer circuit can cause flicker or shorten the life of the LED board.
Does it use a replaceable bulb?
No, the LED source is integrated into the fitting rather than being a swappable lamp. It is rated for 25,000 hours of use, so no bulb changes are needed over its working life.
How do I clean the fitting?
Switch it off and let it cool, then wipe the diffuser and metal body with a soft, dry or barely damp cloth. Avoid solvents and abrasive cleaners, which can mark the grey and gold finish.