Free Delivery on all orders over £99*

Radity 100W Magnetic Track Power Supply - Black

£6399
The RRP is the manufacturer's recommended retail price of the item.
Limited Stock
We are an Independent UK Company
Price match. Found it cheaper? Contact us
Trade Discount Available
Description

The Radity 100W power supply is a recessed driver for 48V magnetic track lighting systems, delivering constant voltage across multiple track segments from a single installation point. The unit measures 340mm long by 25mm wide by 28mm high and sits recessed into the ceiling void, with only the track connection visible below the ceiling line. The black aluminium housing with plastic end caps matches Maytoni's black magnetic track profile.

Designed for residential living rooms, kitchens and commercial retail or hospitality spaces using magnetic track lighting, the power supply supports a combined load of up to 100W across all connected track sections and spotlight heads. The AC 180-260V input range accommodates UK mains voltage fluctuations without additional regulation. Installation requires a minimum 40mm ceiling void depth to accommodate the driver body and allow adequate ventilation clearance above the unit.

The IP20 rating limits the power supply to dry indoor locations — it cannot be installed in bathrooms, kitchens directly above hobs or sinks, or outdoor covered areas where condensation forms. The aluminium construction provides heat dissipation across the length of the driver, preventing localised hotspots that can shorten component life. The recessed mounting keeps the power supply out of sight while maintaining access for future replacement or system expansion.

Specification
Height 2.8cm
Length 34cm
Width 2.5cm
Finish Black
Construction Aluminium & Plastic
IP Rating IP20
Voltage AC 180-260
Wattage 100
Warranty 3 Year Guarantee
Downloads

Product Manual

Frequently Asked

What ceiling void depth is required?

A minimum 40mm void depth is needed to accommodate the 28mm driver height plus ventilation clearance above the unit. Tighter voids can cause overheating and reduce lifespan.

How many track spotlights can this support?

The 100W capacity supports any combination of magnetic track spotlights totalling 100W or less. For example, ten 10W spotlights or five 20W spotlights. Exceeding 100W combined load will trigger overcurrent protection.

Can this be installed in a bathroom?

No. The IP20 rating restricts installation to dry indoor locations only. Bathrooms, kitchens above wet zones, and outdoor covered areas are not suitable due to moisture and condensation risk.

Is the power supply dimmable?

Dimming capability depends on the specific magnetic track spotlights connected to the system, not the power supply itself. Check the spotlight specifications for dimmer compatibility before pairing with a mains dimmer.

Shipping & Returns

Free worldwide delivery

Free worldwide delivery on all orders over £99. International orders for third-party brand products may be subject to an additional courier surcharge based on volumetric weight, particularly on larger lighting fixtures — if a surcharge applies, our team will email you with the amount before dispatch and you can proceed or cancel for a full refund. See full delivery terms.

Returns

30-day returns window from delivery. As all our products are electrical or lighting goods, returned items must be inspected and recertified by a qualified electrician before resale — the cost of this inspection (25–40% of the item value) is deducted from your refund. Customers pay return shipping. Made-to-order, special-order and clearance items cannot be returned. See full returns policy.

You Might Also Like

Recommended For You

    Our Reviews

    From first click to final installation, our customers share how Niori lights up their spaces. Read their words and envision what’s possible for yours.

    Featured Projects

    Step into our portfolio and see how we transform homes, restaurants, and commercial spaces and more, worldwide. Click here for a closer look at our latest projects.

    Description

    The Radity 100W power supply is a recessed driver for 48V magnetic track lighting systems, delivering constant voltage across multiple track segments from a single installation point. The unit measures 340mm long by 25mm wide by 28mm high and sits recessed into the ceiling void, with only the track connection visible below the ceiling line. The black aluminium housing with plastic end caps matches Maytoni's black magnetic track profile.

    Designed for residential living rooms, kitchens and commercial retail or hospitality spaces using magnetic track lighting, the power supply supports a combined load of up to 100W across all connected track sections and spotlight heads. The AC 180-260V input range accommodates UK mains voltage fluctuations without additional regulation. Installation requires a minimum 40mm ceiling void depth to accommodate the driver body and allow adequate ventilation clearance above the unit.

    The IP20 rating limits the power supply to dry indoor locations — it cannot be installed in bathrooms, kitchens directly above hobs or sinks, or outdoor covered areas where condensation forms. The aluminium construction provides heat dissipation across the length of the driver, preventing localised hotspots that can shorten component life. The recessed mounting keeps the power supply out of sight while maintaining access for future replacement or system expansion.

    Specification
    Height 2.8cm
    Length 34cm
    Width 2.5cm
    Finish Black
    Construction Aluminium & Plastic
    IP Rating IP20
    Voltage AC 180-260
    Wattage 100
    Warranty 3 Year Guarantee
    Downloads

    Product Manual

    Frequently Asked

    What ceiling void depth is required?

    A minimum 40mm void depth is needed to accommodate the 28mm driver height plus ventilation clearance above the unit. Tighter voids can cause overheating and reduce lifespan.

    How many track spotlights can this support?

    The 100W capacity supports any combination of magnetic track spotlights totalling 100W or less. For example, ten 10W spotlights or five 20W spotlights. Exceeding 100W combined load will trigger overcurrent protection.

    Can this be installed in a bathroom?

    No. The IP20 rating restricts installation to dry indoor locations only. Bathrooms, kitchens above wet zones, and outdoor covered areas are not suitable due to moisture and condensation risk.

    Is the power supply dimmable?

    Dimming capability depends on the specific magnetic track spotlights connected to the system, not the power supply itself. Check the spotlight specifications for dimmer compatibility before pairing with a mains dimmer.

    Shipping & Returns

    Free worldwide delivery

    Free worldwide delivery on all orders over £99. International orders for third-party brand products may be subject to an additional courier surcharge based on volumetric weight, particularly on larger lighting fixtures — if a surcharge applies, our team will email you with the amount before dispatch and you can proceed or cancel for a full refund. See full delivery terms.

    Returns

    30-day returns window from delivery. As all our products are electrical or lighting goods, returned items must be inspected and recertified by a qualified electrician before resale — the cost of this inspection (25–40% of the item value) is deducted from your refund. Customers pay return shipping. Made-to-order, special-order and clearance items cannot be returned. See full returns policy.