Description
The PLAVE is a round LED ceiling light running up to 48W direct from a 220-240V AC supply, with an integrated LED array so there is no bulb to replace. It pairs colour selectable white (3000K warm, 4000K natural and 6500K cool) with an RGB mode, giving white light for everyday use and colour for mood settings. Output is rated at 1032 lumens in warm white, 2110 in natural white and 1154 in cool white, and the wide 150° beam spreads light evenly across the space below. In US terms it sits in the flush mount LED ceiling light category, fitting close to the ceiling rather than hanging on a drop.
The fitting suits bedrooms, hallways and smaller living rooms, covering around 3 to 7 m² at general lighting levels depending on the white tone selected, with the brighter natural white reaching the upper end of that figure. The 150° spread and low-profile build make it a sensible choice for rooms with standard or lower ceilings, where it keeps light open and shadow-free without intruding into the room. The white modes carry the everyday lighting while the RGB mode adds colour for relaxed evenings or seasonal use, so a single fitting handles both jobs.
Measuring Ø485 × 150 mm and weighing 1.65 kg, the PLAVE has a plastic body finished in black and white. It is ceiling mounted and rated IP20, which makes it suitable for dry indoor rooms only and not for bathrooms, porches or any damp location. The colour rendering is Ra 80 and the LEDs are rated for 25,000 hours of use. This model is not dimmable, with colour and tone changed through its switching rather than a dimmer. The PLAVE range also offers other colour selectable formats for matching fittings across a home.
Specification
| Power |
max 48W |
| Voltage |
220-240 AC |
| Luminous flux |
1032 (WW) / 2110 (NW) / 1154 (CW) lm |
| Colour temperature |
3000/4000/6500/RGBK |
| Colour rendering (CRI) |
Ra 80 |
| Beam angle |
150° |
| IP rating |
IP20 |
| Dimmable |
No |
| Mounting |
Ceiling Mounted |
| Lifespan |
25,000 hours |
| Shape |
Round |
| Dimensions |
Ø485 × 150 mm |
| Weight |
1.65 kg |
| Material |
Plastic |
| Finish |
Black/White |
Downloads
Frequently Asked
What size room does the PLAVE suit?
It covers around 3 to 7 m² at general lighting levels, depending on which white tone you run. That makes it a good fit for bedrooms, hallways and smaller living rooms with standard ceilings.
How do I change the colour temperature and use the RGB mode?
The PLAVE switches between 3000K warm white, 4000K natural white and 6500K cool white for everyday lighting, plus a separate RGB mode for colour. You select the tone or colour through the fitting's switching, so one light handles both white and coloured settings.
Does it take a replaceable bulb?
No, the PLAVE uses an integrated LED array rather than a separate lamp, so there is no bulb to fit or swap. The LEDs are rated for 25,000 hours of use.
How do I clean the PLAVE?
Switch it off and let it cool, then wipe the plastic body and diffuser with a soft, dry or slightly damp cloth. Avoid solvents or abrasive cleaners, which can mark the surface and dull the light output.