Description
The Pesvette is a set of three round recessed downlights in black, made to be set into a ceiling so only a slim black ring shows. Each body is plastic in a black finish and measures 9cm across, with 8.5cm of recess depth needed behind the ceiling. Every light has a GU10 lamp holder and is rated at 4.5W, giving 345lm per light in a cool white tone. The IP20 rating settles where they belong: indoors, in dry rooms, away from bathrooms and the garden.
Three to a set suits the way downlights are often planned, in a row or a small group, so one set covers a short run across a bedroom ceiling, a hallway, a landing or a study. Black trims read clearly against a white ceiling and draw a crisp, graphic line, a look that sits well beside dark picture frames, door handles and switch plates. Cool white light gives a clear, bright feel, a good match for reading, dressing or working at a desk. Each light needs a 6.8cm cut-out, and because the trim is wider than the hole, the black ring covers its edge neatly.
Each downlight has two spring clips at its sides, and because the lamp holder is a standard GU10 cap, a lamp can be changed later without replacing the downlight. There is no switch on the lights themselves; they are switched at the wall, from the light switch in the room. They run on 220-240V, 50/60Hz mains, carry an F energy class, and the set weighs 0.45KG packed. As wired-in mains lights, they are installed by a qualified electrician, and the installation instructions are available as a download. Our practical advice: check the 8.5cm recess depth behind your ceiling before you order.
Specification
| Diameter |
9cm |
| Body Material |
Plastic |
| Body Colour |
Black |
| Light Source |
GU10 (bulb included) |
| Wattage |
3 x 4.5W |
| Lumens |
345lm per light (3 lights) |
| Switch |
None (switched at the wall) |
| IP Rating |
IP20 |
| Protection Class |
Class II |
| Voltage |
220-240V, 50/60Hz |
| Energy Class |
F |
| Recess Depth |
8.5cm |
| Cut-Out |
6.8cm |
| Weight (packed) |
0.45KG |
Downloads
Installation Instructions (PDF)
Frequently Asked
Can these downlights go in a bathroom?
No. They are rated IP20, which means indoors and dry rooms only, so keep them to bedrooms, living rooms, hallways and studies rather than bathrooms or outdoors.
What size of hole does each downlight need?
Each downlight needs a 6.8cm cut-out, and its round black trim is 9cm across, so the ring covers the edge of the hole neatly.
How much space is needed behind the ceiling?
Each light needs a recess depth of 8.5cm, so it is worth measuring the void behind your ceiling before you order a set.
Which lamp does each downlight take?
Each one has a GU10 lamp holder and is rated at 4.5W, giving 345lm per light in a cool white tone.
Do the lights have their own switch?
No, there is no switch on the lights themselves. They are switched at the wall, using the light switch in the room.
What material and finish are the downlights?
The bodies are plastic with a black finish, and the round black trims stand out clearly against a white or pale ceiling.