Description
A light and a fan in the same fitting, finished in a deep coffee tone with brushed copper on the trim. The blades reach 106cm across, so air moves in a slow drift rather than a rush. The light itself is an integrated LED drawing 20W, tuneable from warm white through to cool white and dimmable throughout. A remote comes with it and handles everything: on and off, brightness, the colour of the light and the fan, so nothing needs reaching for on the wall.
We would put this in a bedroom or a living room where summer heat builds and there is no appetite for a floor fan in the corner. At 3600 lumens it works as the main light for a medium-sized room, and because the tone shifts, it can read crisp and clear over a desk in the morning and settle to something softer by evening. The dimming makes it easy to live with in a bedroom, where full output is rarely wanted after dark. It suits open-plan spaces too, where keeping the ceiling clear matters.
The driver sits inside the housing, so the fitting is complete as supplied. Coffee with brushed copper is a warmer pairing than the usual white or black fan, and it sits well with wood floors, brass fittings and darker paint. Keep it to dry rooms under cover; a kitchen or hallway is fine, a bathroom or a porch is not. For cleaning, take the power off and go over the blades and the diffuser with a dry cloth, working outwards along each blade, and skip sprays and anything abrasive. It carries a five year warranty. The LED is built in, so there is nothing to buy alongside it.
Specification
| Colour |
Coffee |
| Second Colour |
Brushed Copper |
| Weight |
5.45KG |
| Diameter |
520/1060mm |
| Height |
285mm |
| Materials Used |
Iron, PC, MS |
| Energy Class |
C |
| Energy Class of Lamp |
Group C |
| Max Energy Class |
C |
| Min Energy Class |
C |
| Lamp |
1 x 20W integrated LED (no lamps to fit) |
| Lamp Cap |
Integral LED |
| Recommended Lamp |
Integral LED |
| Colour Temperature |
3000 - 5000K Tuneable White (±5%) |
| Number of Switching Cycles |
10000 |
| LED Power |
20W (±5%) |
| Lumens per Watt (lm/W) |
180lm/W (±5%) |
| System Flux |
3600lm (±5%) |
| CRI |
>80 |
| Light Distribution |
Ambient |
| Driver Included |
Yes |
| Protection Class |
Class 1 - Earth Connection Required |
| Total Power Consumption |
50W (±5%) |
| Input Voltage |
100-240V~50/60Hz |
| Switch |
Yes - Remote Control |
| Dimmable |
Yes - Remote Control |
| Dimmer Included |
Yes - Remote Control |
| IP Rating |
IP20 |
| Average Life |
25000hrs |
| Warranty |
5yrs |
| UKCA/CE |
Yes |
| Remote Control Information |
R00143 |
| Pieces Included |
1 |
| Unassembled |
Yes-Requires Construction |
| Installation |
Requires Installation By Qualified Electrician |
| Sloped Ceiling Compatible |
No |
| Product Care |
(1) Wipe clean with a dry cloth, do not use any cleaning detergents, do not use rough or coarse material to clean. (2) Ensure light is not illuminated when cleaning. |
| Country of Origin |
China |
Frequently Asked
How much space does it need?
The blades span 1060mm tip to tip, while the central housing measures 520mm across and 285mm deep.
Can I change the colour of the light?
Yes. It is tuneable from 3000K warm white up to 5000K cool white, set from the remote.
Does the remote control the fan as well as the light?
It does. The remote switches and dims the light, adjusts the white tone and runs the built-in 30W DC fan motor.
How bright is the light on full?
Around 3600 lumens from the 20W integrated LED, enough to serve as the only light in most average rooms.
How should I clean the blades?
Isolate the power first, then wipe each blade with a dry or barely damp cloth from the centre outwards. Avoid polish, solvents and scouring pads on the coffee and copper finish.
Can it go in a bathroom or a covered porch?
No. It is rated for dry interior rooms only, so keep it away from damp, spray and outdoor air.