Description
Wide, low and shallow in profile, this is a wall light built the way a picture light is built: a long horizontal body that sits close to the wall and pushes a broad wash of warm white light down over whatever hangs or stands beneath it. The LED sits inside the housing, with the driver included, so it arrives complete with no lamp to source. At 12W it gives a generous but soft output, and the light is fixed rather than dimmable, so it comes on at full strength from a wall switch.
We would use it above art first of all: oils, framed prints, a large photograph, anywhere a downward spread flatters the surface without the hot centre a spotlight leaves. At 60cm wide it suits pictures of similar width, and it is equally at home over a run of shelves, a sideboard or a headboard where reading light is not the point. Warm white keeps timber, paper and warm pigments looking right rather than washed out. It is one we reach for in hallways and on stair landings, where a deeper fitting would be in the way.
The finish is polished chrome, bright and reflective, and it will pick up fingermarks as any mirror-bright metal does. A dry microfibre cloth brings the shine back; if something greasier lands on it, damp the cloth lightly, dry it off and keep sprays and scouring creams away. Switch off and let the housing cool first. Indoor rooms only, and away from bathroom splashes. It carries a three year warranty. We stock the same shape in antique brass and sand black, and in shorter and longer lengths if this width does not match your picture. The LED is built in, so there is nothing further to buy.
Specification
| Colour |
Polished Chrome |
| Wall Mountable |
Yes |
| Weight |
0.70KG |
| Width |
600mm |
| Height |
145mm |
| Projection |
195mm |
| Materials Used |
Stainless Steel, Iron, Acrylic |
| Adjustable Height |
No |
| Energy Class |
G |
| Energy Class of Lamp |
Group A |
| Max Energy Class |
G |
| Min Energy Class |
G |
| Lamp |
1 x 12W integrated LED (no lamps to fit) |
| Lamp Cap |
Integral LED |
| Recommended Lamp |
Integral LED |
| Colour Temperature |
3000K Warm White (±5%) |
| Number of Switching Cycles |
30000 |
| LED Brand |
Epistar |
| Qty of SMD |
60 |
| SMD Chipset |
2835/0.2W |
| LED Power |
12W (±5%) |
| Type of LED |
EPISTAR 2835 |
| Lumens per Watt (lm/W) |
76lm/W (±5%) |
| Beam Angle |
120° |
| System Flux |
908lm (±5%) |
| CRI |
=80 |
| Light Distribution |
Down |
| Driver Included |
Yes |
| Type of Driver |
Constant Current |
| Protection Class |
Class 1 - Earth Connection Required |
| Total Power Consumption |
12W (±5%) |
| Input Voltage |
175-265V~ 50/60Hz |
| Switch |
Not Switched |
| Dimmable |
No |
| IP Rating |
IP20 |
| Average Life |
25000hrs |
| Warranty |
3yrs |
| UKCA/CE |
Yes |
| EMV/EMC |
Yes |
| Pieces Included |
1 |
| Unassembled |
No |
| Installation |
Requires Installation By Qualified Electrician |
| Product Care |
(1) Wipe clean with a dry cloth, do not use any cleaning detergents, do not use rough or coarse material to clean. (2) Ensure light is not illuminated when cleaning. |
| Country of Origin |
China |
Frequently Asked
How much light does it put out?
908 lumens from the 12W integrated LED, at 3000K warm white.
Can I dim it?
No, it runs at a fixed output. There is no switch on the body either, so it is controlled from the wall switch on its circuit.
What sizes does the range come in?
This one is 60cm wide. There is also a 45cm version at 8W and 619 lumens, and a 90cm version at 18W and 1257 lumens.
How far does it stand out from the wall?
Projection is 195mm, with a height of 145mm, so it stays clear of most frames without crowding a hallway.
Is it suitable for a bathroom?
No. It is rated IP20 for dry indoor rooms such as living rooms, bedrooms, halls and landings.
What finishes can I choose?
Polished chrome here, with antique brass and sand black also offered in the same range.