Ora 4 Light Semi-Flush Ceiling Light - Gloss Red & Polished Chrome

The Mantra Ora is a 4 light semi-flush ceiling light built around four sculptural gloss red ABS shades mounted on a polished chrome central stem and base plate. Each shade houses an E27 bulb behind an opal diffuser, directing warm 2700K light outward through the organic curved forms. The 500mm width and 270mm drop from ceiling to lowest point suit standard ceiling heights of 2.4m and above.

Designed for living rooms, dining areas and entrance halls where colour-led statement lighting is needed, the Ora pairs ambient function with bold visual presence. The four shades curve outward at different angles from the chrome centre, creating asymmetrical movement that softens the impact of the bright red finish. Each opal diffuser softens the direct light from the bulb, turning the gloss red shell into part of the light source rather than just a decorative surround.

The gloss red ABS finish reflects surrounding light during the day and shows strong colour saturation under most artificial light conditions. The polished chrome frame and ceiling plate provide contrast against the red and ground the fitting visually, preventing the colour from overwhelming neutral-toned ceilings. At 3.3kg the fitting requires secure fixing to a ceiling joist or reinforced plasterboard anchor, particularly important given the offset weight distribution of the four extended arms.

The Ora is dimmable when paired with suitable dimmable E27 bulbs and a compatible dimmer switch. The four-bulb configuration allows for significant light output when needed (up to 60W total across all four bulbs), but can be reduced for evening ambient lighting. The sculptural form works in contemporary interiors where bold colour is already present, or in monochrome schemes where a single accent piece introduces warmth and character.

Is the Ora dimmable?

Yes, when fitted with dimmable E27 bulbs and connected to a compatible dimmer switch. The bulbs are not included, so choose dimmable LED or halogen bulbs rated for E27 sockets.

What bulbs does it take?

The Ora takes four E27 (Edison screw) bulbs with a combined maximum load of 60W. Most users fit 6-10W LED bulbs in warm white (2700K-3000K) to match the opal diffuser tone.

What ceiling height is needed?

The fitting projects 270mm from the ceiling at its lowest point. In a room with a 2.4m ceiling height, the lowest part of the fitting sits at approximately 2.13m from the floor, giving adequate clearance in most domestic settings.

How is the gloss finish maintained?

The gloss red ABS can be wiped clean with a soft dry microfibre cloth. For fingerprints or smudges, a barely-damp cloth with distilled water works without damaging the finish. Avoid abrasive cleaners or solvents that can dull the gloss surface.