Description
A broad white disc trimmed with wood, this fitting folds a fan into a ceiling light so one point overhead does both jobs. The LED sits behind a wide diffuser and draws 18W, giving 3600 lumens that tune from a warm evening glow through to a crisp cool white. Brightness runs the whole way down to a low level, and a supplied handset controls the light, the colour and the fan without anyone crossing the room.
At 70cm across it holds its own in a main bedroom, a living room or a wide landing, where a smaller fitting would look stranded. We reach for it in rooms that get stuffy in summer, since the DC fan moves air quietly overhead while the light stays soft enough to read under. It suits anyone who would rather not have a bladed fan hanging low overhead, and anyone who likes cooler light for work in the day and something warmer by evening.
The white body is paired with a wood-toned face, plain in outline so it reads as a light first and a fan second. We would choose it for a room already carrying warm timber, where the wood tone gives the ceiling something to answer to. Dust gathers on any broad surface, so switch off at the wall and give the rim and diffuser an occasional pass with a dry microfibre cloth. Nothing wet, and no cleaner near the diffuser. Keep it to indoor rooms; damp bathrooms and open porches are not for it. It carries a five year warranty, and the LED is built in, so there is no lamp to change.
Specification
| Colour |
White |
| Second Colour |
Wood |
| Weight |
4.20KG |
| Diameter |
700mm |
| Height |
340mm |
| Materials Used |
Iron, ABS, PS |
| Energy Class |
B |
| Energy Class of Lamp |
Group B |
| Max Energy Class |
B |
| Min Energy Class |
B |
| Lamp |
1 x 18W integrated LED (no lamps to fit) |
| Lamp Cap |
Integral LED |
| Recommended Lamp |
Integral LED |
| Colour Temperature |
3000 - 5000K Tuneable White (±5%) |
| Number of Switching Cycles |
10000 |
| LED Power |
18W (±5%) |
| Lumens per Watt (lm/W) |
200lm/W (±5%) |
| System Flux |
3600lm (±5%) |
| CRI |
>80 |
| Light Distribution |
Ambient |
| Driver Included |
Yes |
| Protection Class |
Class 1 - Earth Connection Required |
| Total Power Consumption |
48W (±5%) |
| Input Voltage |
220-240V~50/60Hz |
| Switch |
Yes - Remote Control |
| Dimmable |
Yes - Remote Control |
| Dimmer Included |
Yes - Remote Control |
| IP Rating |
IP20 |
| Average Life |
25000hrs |
| Warranty |
5yrs |
| UKCA/CE |
Yes |
| Remote Control Information |
R00235 |
| Pieces Included |
1 |
| Unassembled |
Yes-Requires Construction |
| Installation |
Requires Installation By Qualified Electrician |
| Sloped Ceiling Compatible |
No |
| Product Care |
(1) Wipe clean with a dry cloth, do not use any cleaning detergents, do not use rough or coarse material to clean. (2) Ensure light is not illuminated when cleaning. |
| Country of Origin |
China |
Frequently Asked
How is the light dimmed and switched?
By the remote handset that comes with it. The same handset sets brightness, shifts the colour temperature and runs the fan, so no separate wall dimmer is needed.
What colour of light does it give?
It is tuneable across 3000K to 5000K, so you can pick anything from a warm domestic white for the evening to a cool, daylight-leaning white for working or getting ready.
How bright is it for a large room?
It puts out 3600 lumens from an 18W LED, which is enough for a bedroom or living room of around 15 to 20 square metres as the main light.
How big is it overall?
The canopy measures 700mm in diameter and 340mm deep, and the fitting weighs 4.2kg.
Can the fan run without the light on?
Yes. The fan and the LED are controlled separately from the handset, so you can have air movement in the dark or light with the fan off.
How should the wood finish be cleaned?
A dry microfibre cloth is all it needs, with the power off first. Avoid polishes and damp cloths, as moisture can mark the finish over time.