Nur LED Flush Ceiling Light 34W 3000K - Silver

The Nur is a 570mm square flush ceiling light built around four intersecting curved bars finished in silver, each housing integrated LEDs behind frosted white diffusers. The bars cross at different angles and heights, creating a layered geometric pattern that projects 70mm from the ceiling. The four integrated LED modules deliver a combined 2600 lumens at 3000K warm white colour temperature, consuming 34W total.

Designed for rooms with standard or low ceiling heights (from 2.3m upwards), the Nur suits living rooms, bedrooms, home offices and hallways where flush mounting is needed but the visual interest of a feature fitting is wanted. The 570mm width covers ceiling spaces above coffee tables, double beds or home office desks without dominating smaller rooms. The frosted diffusers eliminate visible LED spots, spreading light evenly across the ceiling and into the room with a 120° beam angle.

Each curved bar combines a silver-painted metal body with polished chrome end caps, creating tonal variation within the same metallic palette. The silver body has a low-sheen satin finish that minimises glare, while the chrome caps add sharper reflections at the bar ends. The frosted diffuser sections sit flush within each bar, protected from dust and handling during installation. The fitting mounts directly to a standard ceiling rose with a single central fixing point concealed behind the intersecting bars.

The Nur is part of Mantra's Spanish-designed contemporary lighting range and carries a 3-year manufacturer warranty. The integrated LEDs are non-replaceable but rated for 25,000+ hours of use (approximately 11 years at 6 hours per day). The fitting weighs 2.7kg when installed, requiring secure ceiling fixings in plasterboard or direct-to-joist mounting.

Is the Nur dimmable?

No. The integrated LED is non-dimmable and runs at full 34W output on mains switching only. Pairing with a dimmer switch is not supported and may damage the internal driver.

What ceiling height does it suit?

The 70mm projection suits rooms with ceiling heights from 2.3m upwards. In rooms with ceilings above 3m the light spread remains effective but the visual impact of the geometric design reduces with distance.

Can the LEDs be replaced?

No. The LEDs are integrated into the bars and non-replaceable. They are rated for 25,000+ hours of use, which is approximately 11 years at 6 hours per day. After this the entire fitting would need replacing.

How is it installed?

The fitting mounts to a standard ceiling rose with a single central fixing point concealed behind the intersecting bars. The 2.7kg weight requires secure ceiling fixings — either directly into joists or using appropriate plasterboard fixings rated for the load.