Notus 620x300 18W 218 4LED Ceiling Light - White

The Notus is a rectangular LED ceiling light built around two replaceable T8 LED tubes, each drawing up to 18W from a 220-240V AC mains supply. It mounts directly to the ceiling and casts a broad, even wash across the room below rather than a tight pool, which suits it to general background lighting. In US terms a fitting of this kind reads as a flush mount LED ceiling light, sitting close against the surface with no drop or pendant rod. The tubes seat into G13 caps, so the light source is a standard linear LED format rather than a sealed integrated panel.

Because the spread is wide and steady, the Notus works well in kitchens, utility rooms, hallways, landings and small workshops where you want clear, shadow-free coverage from one central point. The 615 x 300 mm footprint keeps it compact enough for a modest room while still putting out useful light from a pair of 18W tubes. It is well matched to standard ceiling heights of around 2.4 metres, where the twin-tube layout fills the floor area without leaving dim corners. With an IP20 rating this is a dry indoor fitting only, so keep it clear of bathrooms, porches, garages open to the weather and any damp location.

Construction is a steel housing finished in white, measuring 615 × 300 × 75 mm and weighing 1.49 kg, so it stays slim against the ceiling. The two T8 LED tubes run on G13 caps and can be swapped individually if one ever needs replacing, which is a practical advantage over a fixed integrated source. It fixes flat to the ceiling using the supplied mounting points and runs straight from mains voltage with no separate transformer to specify. The Notus range also includes other rectangular sizes and wattages, so you can keep a consistent look across several rooms.

What size room does this suit?

The Notus is built for small to medium rooms such as kitchens, utility areas, hallways and landings. Its two 18W T8 LED tubes give an even spread from a single central point, so it works best where you want general background light rather than focused task lighting over one spot.

Can the LED tubes be replaced?

Yes. Unlike a sealed integrated fitting, the Notus uses two T8 LED tubes on standard G13 caps, so each tube can be removed and swapped individually. This makes long-term maintenance straightforward if a single tube ever fails.

Is this fitting suitable for bathrooms or outdoor areas?

No. The Notus carries an IP20 rating, which means it is intended for dry indoor use only. Keep it out of bathrooms, shower zones, garages open to the weather and any damp or outdoor location.

How do I clean it?

Switch the fitting off and let it cool, then wipe the white steel housing and the tubes with a soft dry or barely damp cloth. Avoid soaking it or using harsh solvents, as the IP20 rating means it is not built to resist water ingress.