Description
Amber glass shades and an antique brass frame give this pendant a warm, slightly aged look before it is even switched on. It spans 46cm, wide enough to read as a proper light over a table rather than a small fitting lost against the ceiling, and it takes four E14 candle lamps. We would fit LED candle lamps here, plain or flame tipped, depending on how much of the lamp shape you want to see through the glass. The amber tint takes the hard edge off whatever you put in it, so the light lands closer to firelight than daylight.
The drop is adjustable, so it can hang low over a dining table or be shortened for a hallway or a landing where headroom is tighter. It suits rooms already leaning warm: timber floors, deeper paint colours, brass or bronze door furniture. Fit dimmable lamps and it will work from a dimmer, which is worth doing where the same table takes homework in the afternoon and dinner in the evening. It is one we reach for when a plain white shade would read too cold in an older house.
The colour runs through the glass rather than sitting on the surface as a coating, and the brass is antiqued rather than bright, so handling marks show less than they would on chrome. To clean, switch off and let things cool, take the lamps out, then wipe the glass with a barely damp cloth and dry it at once; keep polishes and bathroom sprays off the metal, as they flatten the finish. Keep it to dry rooms inside the house. It carries a one year warranty. We also stock this pendant in polished chrome with clear glass, and a smaller three light version in the same antique brass and amber pairing. Lamps are not included.
Specification
| Colour |
Antique Brass |
| Ceiling Mountable |
Yes |
| Weight |
5.10KG |
| Diameter |
460mm |
| Minimum Drop |
400mm |
| Maximum Drop |
1400mm |
| Materials Used |
Iron, Glass |
| Adjustable Height |
Yes |
| Energy Class |
A++ to D |
| Max Energy Class |
A++ |
| Min Energy Class |
D |
| Lamp |
4 x E14 20W max (lamps not included) |
| Lamp Cap |
E14 |
| Recommended Lamp |
LED (Candle C35, Candle (Flame Tip)) |
| Light Distribution |
Ambient |
| Protection Class |
Class 1 - Earth Connection Required |
| Total Power Consumption |
Dependent On Lamps Used (±5%) |
| Input Voltage |
220-240V~50/60Hz |
| Dimmable |
Yes - Dimmable Lamps Required |
| IP Rating |
IP20 |
| Warranty |
1yr |
| UKCA/CE |
Yes |
| Shade Colour |
Amber |
| Shade Material |
Glass |
| Shade Included |
Yes |
| Pieces Included |
1 |
| Installation |
Requires Installation By Qualified Electrician |
| Product Care |
(1) Wipe clean with a dry cloth, do not use any cleaning detergents, do not use rough or coarse material to clean. (2) Use white gloves provided when handling crystal and glass. (3) Ensure light is not illuminated when cleaning. |
| Country of Origin |
China |
Frequently Asked
What size is it and how far down does it hang?
The shade cluster measures 460mm across. The drop adjusts between 400mm and 1400mm, so you can set it high in a hallway or bring it down over a table.
Which lamps should I buy for it?
It holds four E14 candle lamps, up to 20W each. LED candles are the sensible choice, in either the straight C35 shape or the flame tip.
Can I put it on a dimmer?
Yes, provided the lamps you fit are themselves dimmable. Non-dimmable LEDs will flicker or buzz on a dimmer circuit.
What is the shade made from?
Glass, in an amber tone, paired with metalwork in an antique brass finish.
Is it suitable for a bathroom or a covered porch?
No. It is rated for dry interior rooms only, so keep it to living spaces, dining rooms, hallways and bedrooms.
How heavy is the fitting?
It weighs 5.1kg without lamps.