Description
Broad and low in outline, this is a light and a fan in one body, spanning 132cm across and sitting close against the ceiling. The LED is built in and tuneable, moving from a warm domestic white through to a crisp cool white, and it dims from the handset that comes with it. Full output is 3800 lumens, plenty to work as the only light in a good sized room.
It is the fitting we suggest where the ceiling point must serve as both light and fan, in a bedroom that gets stuffy in July or a living room where a fan on a stand would only add clutter. Everything runs from the remote, so the light level, the colour of the light and the fan speed are all set from the bed or the sofa without anyone getting up. The scale asks for a room with some floor to it rather than a small box room, and it earns its keep through the year: air moving in summer, and the warmer end of the white range for winter evenings.
The body pairs a wood finish with black, so it reads more as a piece of furniture than as machinery on the ceiling. The light itself draws 19W, and a five year warranty applies. Keep it clean by switching off first and running a dry cloth over the wood and the painted parts; nothing damp, and no sprays near the driver housing. The LED is part of the fitting, so there is no lamp to replace. Dry, heated rooms suit it, and it is not one for a bathroom or a covered porch. Left plain in a bedroom or set against pale walls in a living room, it stays quiet in the eye even at this width.
Specification
| Colour |
Wood |
| Second Colour |
Black |
| Weight |
3.95KG |
| Diameter |
1320mm |
| Height |
250mm |
| Materials Used |
Iron, ABS, MS |
| Energy Class |
B |
| Energy Class of Lamp |
Group B |
| Max Energy Class |
B |
| Min Energy Class |
B |
| Lamp |
1 x 19W integrated LED (no lamps to fit) |
| Lamp Cap |
Integral LED |
| Recommended Lamp |
Integral LED |
| Colour Temperature |
3000 - 5000K Tuneable White (±5%) |
| Number of Switching Cycles |
10000 |
| LED Power |
19W (±5%) |
| Lumens per Watt (lm/W) |
200lm/W (±5%) |
| System Flux |
3800lm (±5%) |
| CRI |
>80 |
| Light Distribution |
Ambient |
| Driver Included |
Yes |
| Protection Class |
Class 1 - Earth Connection Required |
| Total Power Consumption |
51W (±5%) |
| Input Voltage |
100-240V~50/60Hz |
| Switch |
Yes - Remote Control |
| Dimmable |
Yes - Remote Control |
| Dimmer Included |
Yes - Remote Control |
| IP Rating |
IP20 |
| Average Life |
25000hrs |
| Warranty |
5yrs |
| UKCA/CE |
Yes |
| Remote Control Information |
R00143 |
| Pieces Included |
1 |
| Unassembled |
Yes-Requires Construction |
| Installation |
Requires Installation By Qualified Electrician |
| Sloped Ceiling Compatible |
No |
| Product Care |
(1) Wipe clean with a dry cloth, do not use any cleaning detergents, do not use rough or coarse material to clean. (2) Ensure light is not illuminated when cleaning. |
| Country of Origin |
China |
Frequently Asked
How much room does it need?
It measures 1320mm across the blades and 250mm deep, so it wants a room with clear floor space beneath rather than a narrow hallway or a small box room.
Can I change the colour of the light?
Yes. The white is tuneable from 3000K through to 5000K, adjusted on the supplied remote, so you can run it warm in the evening and cool for tasks.
Do I need to buy a dimmer as well?
No. Dimming is handled by the remote control that comes with it, along with the fan and the colour temperature, so no separate wall dimmer is needed.
How bright is it, and how much power does it use?
The light gives 3800 lumens from 19W. The built-in DC fan is rated at 32W, so even with both running the draw is modest.
Will I ever have to replace the LED?
The LED is integral and rated at around 25,000 hours, so there is no lamp to change during normal use. Colour rendering is above 80.
How should I clean the wood?
Switch it off and wipe the wood-finished surfaces with a dry, soft cloth. Avoid water, polish and aerosol sprays, particularly around the central housing.