Description
Two materials carry this one: a warm wood tone frame set against a white ceramic diffuser, measuring 72cm across. The LED is integrated and dimmable, and the white tone runs from warm through to cool, all set from the supplied remote. A DC fan is built into the body, so a single fitting handles both the light and the air in a room. We reach for it where a pendant and a separate fan would leave a ceiling looking busy.
Bedrooms are the obvious home for it, where the cool setting suits dressing and reading and the warm end takes over later in the evening. It gives around 3000 lumens, enough for a good sized double room, a home office or a landing, and the remote means the level and the tone change without anyone getting up. Rooms that stay dry are its territory, so keep it clear of bathrooms and covered outdoor spaces. Anyone who wants moving air in summer without a second fitting overhead will get the most from it.
The ceramic gives the diffuser a solid, slightly matt face rather than the glare of bare plastic, and the wood tone softens the edge of a wide disc on a plain white ceiling. The driver is supplied with it, and the LED is built in, so there is nothing to buy alongside. For cleaning, turn the light off, let the fan come to a stop, then take a dry cloth over the ceramic and the wood; sprays and solvents will do the finish no favours. It carries a five year warranty. We like it in rooms with pale timber floors or oak furniture, where the wood tone picks up what is already there.
Specification
| Colour |
Wood |
| Second Colour |
White Ceramic |
| Weight |
2.10KG |
| Diameter |
720mm |
| Height |
200mm |
| Materials Used |
Iron, ABS, MS |
| Energy Class |
B |
| Energy Class of Lamp |
Group B |
| Max Energy Class |
B |
| Min Energy Class |
B |
| Lamp |
1 x 15W integrated LED (no lamps to fit) |
| Lamp Cap |
Integral LED |
| Recommended Lamp |
Integral LED |
| Colour Temperature |
3000 - 5000K Tuneable White (±5%) |
| Number of Switching Cycles |
10000 |
| LED Power |
15W (±5%) |
| Lumens per Watt (lm/W) |
200lm/W (±5%) |
| System Flux |
3000lm (±5%) |
| CRI |
>80 |
| Light Distribution |
Ambient |
| Driver Included |
Yes |
| Protection Class |
Class 1 - Earth Connection Required |
| Total Power Consumption |
41W (±5%) |
| Input Voltage |
100-240V~50/60Hz |
| Switch |
Yes - Remote Control |
| Dimmable |
Yes - Remote Control |
| Dimmer Included |
Yes - Remote Control |
| IP Rating |
IP20 |
| Average Life |
25000hrs |
| Warranty |
5yrs |
| UKCA/CE |
Yes |
| Remote Control Information |
R00143 |
| Pieces Included |
1 |
| Unassembled |
Yes-Requires Construction |
| Installation |
Requires Installation By Qualified Electrician |
| Sloped Ceiling Compatible |
No |
| Product Care |
(1) Wipe clean with a dry cloth, do not use any cleaning detergents, do not use rough or coarse material to clean. (2) Ensure light is not illuminated when cleaning. |
| Country of Origin |
China |
Frequently Asked
How wide is it, and how deep does it sit?
It measures 720mm in diameter with a height of 200mm, so it reads as a broad, shallow disc on the ceiling.
Can I change the colour of the light?
Yes. The white tone is tuneable from 3000K through to 5000K, from a warm domestic white to a crisp cool white, adjusted from the remote.
How is the light and the fan controlled?
Both are run from the remote that comes with it, including the dimming, so no separate wall dimmer is called for.
Do I need to buy a lamp for it?
No. The LED is integrated, rated at 15W with an output of around 3000 lumens and an average life of 25,000 hours, and the driver is included.
What is the best way to clean the ceramic?
Switch it off first and let the fan stop, then use a soft dry cloth on the ceramic and the wood. Avoid household sprays, polishes and solvents, which can mark either finish.