Description
The Narisa is a 2-light wall light built from overlapping chrome-plated metal discs arranged in a spherical cluster around a central acrylic diffuser. Each disc measures approximately 40-60mm across and sits at a different angle, creating depth and catching light from multiple directions. The fitting is supplied with two E14 LED bulbs (7W each), which illuminate the inner diffuser and reflect off the surrounding metal elements. The supplied bulbs are dimmable when wired to a compatible LED dimmer switch.
Designed for hallways, living rooms and bedrooms where a decorative wall light can provide both accent and task lighting, the Narisa works best on plain or lightly textured walls where the chrome discs can create shadow patterns. The 16cm projection from the wall means the fitting sits proud enough to cast distinct shadows without blocking circulation in narrow corridors. At 32cm wide and 19cm high, it occupies less wall space than a typical three- or five-light vanity fitting.
The chrome plating is applied over a metal substrate, giving each disc a mirror-like reflectivity that amplifies both natural daylight and artificial bulb light. The acrylic diffuser behind the discs softens direct glare from the bulbs while allowing the warm 3000K light of the supplied bulbs to pass between the gaps in the disc arrangement. The IP20 rating restricts use to dry indoor locations only, so it is not suitable for bathrooms, kitchens near sinks, or outdoor areas.
Specification
| Width |
32cm |
| Height |
19cm |
| Depth |
16cm |
| Weight |
1.22kg |
| Energy Class |
G |
| IP |
IP20 |
| Electric Class |
Class 1 |
| Power |
2x7W |
| Voltage |
220/240V |
| Frequency |
50/60Hz |
| Lumen |
1120lm |
| Lampholder |
E14 |
| Finish |
Chrome Plating |
Downloads
Product Specification Sheet
Assembly Instruction
Frequently Asked
What bulbs does the Narisa take?
The Narisa is supplied with two E14 LED candle bulbs, 7W each and 3000K warm white, so it arrives ready to use. The E14 lampholders also take standard small Edison screw bulbs up to 20W each if you later want to change the light.
Can it be used in a bathroom?
No. The IP20 rating restricts use to dry indoor locations only. For bathroom use, you need an IP44 or IP65 rated fitting suitable for zones 1, 2 or 3 depending on proximity to water sources.
How far does it project from the wall?
The fitting projects 16cm from the wall surface once installed. In narrow hallways or corridors narrower than 1m, check that the projection leaves adequate clearance for circulation.
Is it dimmable?
Yes. The supplied E14 LED bulbs are dimmable, so the Narisa can be dimmed when wired to a compatible LED dimmer switch. If you replace the bulbs, use dimmable LED bulbs to keep this function.