MAH PRO 52W 15R PRO NW 1500x80 LED Batten 110 deg IP66 Cool White - Grey

The MAH PRO is a 1500x80 LED batten built for hard-working spaces, drawing up to 52W and delivering up to 8400 lumens of crisp 4000K cool white light. A wide 110 deg spread pushes the output evenly along the length of the fitting rather than pooling it in one spot, so a run lays down consistent brightness across a working area. Power is selectable across four levels (52 / 44.5 / 37 / 29.5W), letting the same fixture suit a small store or a larger bay. To US buyers this format is the familiar LED shop light or wraparound, hung in a row over a bench or aisle.

Rated IP66, the MAH PRO copes with exposed outdoor sites and genuinely wet locations, which makes it a sensible pick for a damp garage, a workshop, a covered car park or an unheated utility room. At full output it covers around 17 to 28 m² at general lighting levels, depending on which power step you set, so a couple of units handle a single-car garage and a longer line suits a workshop or storage area. It mounts directly to a ceiling or a wall, and the long thin profile keeps it close to the surface where headroom is tight.

The body is moulded polycarbonate finished in grey, with an IK08 impact rating that helps it shrug off knocks in a busy working environment. It runs straight from 220 to 240V AC mains and carries a rated lifespan of 50,000 hours, with a Ra 80 colour rendering that is well matched to general task and storage areas. The fitting is not dimmable, so it is wired for simple on-off switching. We also stock the wider MAH PRO range for matching weatherproof lighting across larger sites.

Where is this batten suitable to use?

It is built for garages, workshops, car parks and damp utility areas. The IP66 rating means it withstands exposed outdoor positions and direct wet conditions, so it can be fitted indoors or out without an enclosure.

What does the IP66 rating cover?

IP66 means the fitting is fully dust-tight and protected against powerful water jets from any direction. That makes it safe for fully exposed outdoor mounting and washdown areas, not just sheltered spots.

What length is it and how bright does it get?

The fitting measures 1500 x 75 x 75 mm and produces up to 8400 lumens at its top 52W setting. Power is selectable across four steps down to 29.5W, so output can be trimmed to 5000 lumens where less light is needed.

How do I clean and maintain it?

Wipe the polycarbonate body with a soft damp cloth and a mild detergent, avoiding abrasive cleaners that could mark the surface. Isolate the supply first, and because it is IP66 rated it can be cleaned in dusty or wet environments without concern.