MAH PRO 1500x80 52W Power Selectable LED Batten IP66 110 deg 52W Y Cool White - Grey

The MAH PRO is a 1500x80 weatherproof LED batten running on 220 to 240V AC, with selectable power across 52W, 44.5W, 37W and 29.5W steps that deliver 8400, 7300, 6200 and 5000 lumens respectively. The output is a crisp 4000K cool white at Ra 80, spread through a wide 110 degree beam for even coverage along its length. Across the Atlantic a long sealed fitting like this is usually called an LED shop light, or a wraparound when run in a continuous line, and the MAH PRO answers to both names.

Measuring 1500mm long, the batten suits garages, workshops, car parks, plant rooms and damp utility spaces where reliable working light matters more than decoration. At its top 52W setting it covers around 28 m² at general lighting levels, dropping to roughly 17 m² on the lowest 29.5W step, which makes it easy to match the output to the room rather than over-lighting it. The 1500mm length lines up neatly with standard bench and bay spacing, and several units can be set out in a row to light a longer run.

Built from polycarbonate with a grey finish, the MAH PRO carries an IP66 rating and IK08 impact resistance, so it withstands exposed outdoor positions, hose-down areas and dust-laden workshops. It is rated for 100,000 hours and is not dimmable, running at the wattage selected at install. The fitting can be ceiling or wall mounted using the supplied brackets, and the sealed body keeps moisture and grime away from the LEDs. The MAH PRO range also includes shorter lengths for matching shorter bays and corridors.

Where is this batten suitable for use?

It is built for garages, workshops, car parks and damp utility areas, and its IP66 rating means it copes with exposed outdoor positions and wet locations too. The IK08 impact rating adds resilience in busy working spaces where knocks are likely.

Does the IP66 rating make it fully weatherproof?

Yes. IP66 means the fitting is dust-tight and protected against powerful water jets, so it can be mounted outdoors or in wash-down areas without issue. The sealed polycarbonate body keeps moisture and dust clear of the internal LEDs.

Can it be linked in a continuous run?

Several MAH PRO battens can be set out in a row to light a longer bay, corridor or workshop. Space them to suit the working area, using the top 52W setting where brighter task light is needed and a lower step elsewhere.

How do I clean the batten?

Wipe the polycarbonate diffuser with a soft damp cloth and a mild detergent, avoiding abrasive pads or solvents that could dull the surface. Because it is sealed to IP66, the exterior can simply be wiped or hosed clean in dusty workshop and outdoor settings.