MAH MAX 1180x80 38W LED Batten IP66 110 deg Cool White - Black

The MAH MAX is an IP66 LED batten light measuring 1175 x 80 x 70 mm, drawing 38W to put out 6080 lumens at a 4000K cool white tone. Its 110 degree spread casts an even wash of light along its length rather than a tight beam, which is what makes a batten the workhorse fixture for keeping a whole working area bright. To US buyers this format is more familiar as an LED shop light, the linked strip fitting that runs above a bench or down a garage bay, and its 160 lm/W efficiency keeps running costs sensible across long hours.

This MAH MAX fitting suits garages, workshops, sheds and car parks, along with damp utility spaces where ordinary fittings would not last. At general lighting levels its output covers around 20 m², so one unit comfortably lights a single-car garage or a small workshop, with several mounted in a row for a longer space. It fixes to a ceiling or a wall, so it can sit overhead above a work surface or run along a wall where bench lighting is needed. The IP66 rating means it copes with washdown, dust and exposed outdoor positions, making it equally at home under an open carport or on a covered loading bay.

Built with a polycarbonate body, the MAH MAX carries an IP66 weatherproof rating and an IK08 impact rating, so it withstands knocks as well as water jets and grime. The integrated LED is rated for 50,000 hours and the fitting is not dimmable, running directly from a 220-240V AC supply with ceiling or wall mounting hardware. The finish is black, keeping it discreet against dark soffits and steel framing. The wider Mah Max range includes other lengths and wattages for matching a run across a larger building.

Where is this batten suitable for use?

It is built for garages, workshops, sheds, car parks and damp utility areas. With its IP66 rating it also handles fully exposed outdoor and wet locations, including positions subject to water jets and washdown. The black polycarbonate body resists dust and impact in busy working spaces.

Can several of these be linked in a run?

Battens are commonly installed in a row to cover a longer space, and at around 20 m² of coverage each at general lighting levels you can plan how many a given area needs. Mount them end to end along a ceiling or wall for continuous light across a workshop or car park. Wiring between units should follow the supplied instructions and standard practice.

How long is it and how bright?

The fitting measures 1175 x 80 x 70 mm and produces 6080 lumens from 38W of power, giving an efficiency of 160 lm/W. The 4000K cool white tone suits task areas where clear, neutral light is wanted. The 110 degree beam spreads that output evenly along the fitting's length.

How do I clean it?

Wipe the polycarbonate body with a soft, damp cloth and a mild detergent, then dry it off. Avoid abrasive pads or harsh solvents that could mark the surface. Thanks to the IP66 rating it can be cleaned without concern about water ingress, which is useful in dusty or greasy workshop settings.