MAH 1570x90 58W IP65 LED Batten Light - Grey

The MAH is a weatherproof LED batten light measuring 1570 by 90 by 92 mm, running on 220 to 240V AC and drawing up to 58W through a T8 LED tube on a G13 cap. For buyers in the US this is the kind of fixture commonly searched as an LED shop light or wraparound, a single long linear fitting that delivers broad, even output along its length. The rectangular body mounts to the ceiling and gives the wide, shadow-free wash that suits working spaces rather than a tight directional beam.

The fitting earns its place in garages, workshops, car parks, storerooms and damp utility areas where consistent light over a large footprint matters more than decorative effect. Coverage runs the length of the 1570 mm body, so a row of fittings can be spaced to light a workbench, parking bay or aisle without dark patches between them. Because the housing is fully weatherproof it copes with cold, dusty and humid sites that would compromise an open ceiling light, and it is well suited to garages and outbuildings where the temperature and air quality are not controlled.

Construction is a plastic housing finished in grey, rated IP65 so it withstands exposed outdoor positions, water jets and the dust found in workshops and car parks. The G13 end caps accept a standard T8 LED tube, keeping the light source replaceable rather than sealed in, and the fitting is ceiling mounted via its fixing points. At 1.48 kg it is light enough for straightforward overhead installation. Our wider Mah batten range includes other lengths in the same grey weatherproof format for matching a run across a larger space.

Where is this batten typically used?

It is built for garages, workshops, car parks, storerooms and damp utility areas where you need broad, even light over a long run. The weatherproof housing also makes it suitable for exposed outdoor and sheltered industrial sites. Several fittings can be spaced along an aisle or bay for continuous coverage.

Is it suitable for outdoor and wet locations?

Yes. The fitting carries an IP65 rating, which means it is sealed against dust and protected from water jets from any direction. That covers exposed outdoor positions, wash-down areas and humid utility spaces.

What tube does it take and is it included?

It uses a T8 LED tube on a standard G13 cap, drawing up to 58W. Because the source is a replaceable tube rather than an integrated array, the light source can be swapped at end of life. Check the listing for tube supply, as battens of this type are often sold for a standard T8 LED tube.

How do I keep it clean and maintained?

Wipe the grey housing and diffuser with a damp cloth once power is isolated, avoiding solvents that could mark the plastic. In dusty workshop or car park settings, clearing build-up from the surface keeps light output consistent. The IP65 seal means it can be wiped down in damp conditions without risk.