Magneto Shallow Single Connector Surface L-Joint Wall - Black

This is the inward corner piece in the Magneto shallow surface track range: a single connector that carries a run of track round a wall-to-wall turn without breaking the line. The body is a squat black square, about 11cm across each way and only a few millimetres deep, so the corner sits low and quiet against the ceiling instead of announcing itself. It holds no lamp of its own; the light comes from the heads you space along the run, and this part simply keeps the circuit and the profile going in a new direction.

We would use it wherever a track wants to follow the shape of the room rather than stop short at a wall. In a kitchen that means a run above the worktop turning into the corner and continuing along the return; in a hallway it means one unbroken line carrying on into a landing or a boot room. It suits anyone planning lighting as a layout rather than a set of separate fittings, and it is the part we point people towards when a single straight length of track leaves half the room dark. It is designed for the shallow Magneto profile, so it pairs with the surface track and endcaps from the same range.

The finish is black throughout, matched to the track and the other joints so nothing stands out at the corner. Keep the system switched off at the wall before you go near it with a cloth, then take dust off the flat faces with something dry and soft, leaving sprays and solvents well alone. It is intended for dry rooms indoors, on an ordinary domestic supply. It carries a three year warranty. We stock the outward version and the right-angle version alongside it, plus deep-profile equivalents, so a run can be planned in advance and the joints ordered to suit.

What size is this connector?

It measures 110mm by 110mm with a height of 27mm, so it keeps to the shallow profile of the track it joins.

Does it take a lamp?

No. It is a non-electrical connector; the lighting comes from the heads fitted along the track run.

Which track does it fit?

It is made for the Magneto shallow surface track, references M8300 and M8301.

What does 'wall to wall in' mean?

It forms an inward corner, taking the track round into the angle of two walls. For a corner that turns the other way, choose the wall-to-wall out version.

How should it be cleaned?

Switch the system off first, then wipe the flat black faces with a dry, soft cloth. Avoid sprays, polishes and solvents.

Is there a warranty?

Yes, it carries a three year warranty.