Description
Corners are where a run of recessed track usually stops. This piece keeps it going. It is the L-joint from our Magneto recessed range, roughly 11cm along each side, taking the line out of one wall and round to meet the next. The body is black throughout, so it reads as a continuation of the channel rather than a break in it. There is no lamp head here: it is the turn in the line, not a light in its own right.
We reach for this when a plan calls for one unbroken line around a room instead of separate runs on each side. A kitchen where the track follows the ceiling from the sink wall across to the hob wall, a hallway that bends, a landing where the pictures change wall: all of them need the angle to be handled properly rather than fudged. It suits anyone building a Magneto system up piece by piece, and it is sensible to order it with the track so the whole corner turns up together. This is the outward facing version, with the angle opening away from the corner.
The black finish is carried through the whole range, so tracks, end caps and joints sit together and the geometry stays quiet once the lamp heads are on. Dark surfaces do show dust, so an occasional pass with a dry cloth along the upper edges keeps it looking crisp; there is no need for anything wet or abrasive. It carries a three year warranty. We also stock the inward facing joint and a right angled version alongside the recessed track itself, which means a run can be drawn around most room shapes before a single part is ordered. Lamp heads and the track are bought separately.
Specification
| Colour |
Black |
| Weight |
0.26KG |
| Length |
110mm |
| Width |
110mm |
| Height |
67mm |
| Materials Used |
Aluminium |
| Lamp Cap |
Non-Electric |
| IP Rating |
IP20 |
| Warranty |
3yrs |
| UKCA/CE |
Yes |
| TUV |
Yes |
| EMV/EMC |
Yes |
| Pieces Included |
1 |
| Installation |
Requires Installation By Qualified Electrician |
| Product Care |
(1) Wipe clean with a dry cloth, do not use any cleaning detergents, do not use rough or coarse material to clean. (2) Ensure light is not illuminated when cleaning. |
| Country of Origin |
China |
Frequently Asked
What are the dimensions of this joint?
It measures 110mm along each side and 67mm deep, so it matches the profile of the Magneto recessed track.
Which parts of the range does it work with?
It is made for the Magneto recessed track system, references M8307 and M8308.
Does it hold a lamp?
No. It is a non-electrical corner piece that carries the line of the track round a turn; the light comes from the heads fitted along the run.
What is the difference between the out and in versions?
This one turns the run with the angle facing outward from the corner. The wall to wall in version does the same job with the angle facing the other way, and we stock that too.
How should it be cleaned?
A dry cloth is all it needs. Avoid solvents and scouring pads, which will mark the black finish.
Is there a warranty?
Yes, it carries a three year warranty.