Description
A compact spotlight head that sits on Magneto track and aims where you need it, drawing 7W and putting out 560 lumens of warm white light at 3000K. The beam is a focused pool rather than a broad wash, so it picks out a worktop, a shelf or a framed print without washing the whole room. The LED and its driver are built in, and the output is fixed rather than adjustable. Colour rendering is high, which counts for a lot when the light is landing on food, fabric or paint.
We use heads like these where a fixed grid of downlights would be too blunt: over an island, along a run of shelving, down a hall hung with pictures. They suit people who expect to move things around, since each head slides along the track and re-aims by hand. In a kitchen we would set a few along the working side of the room and leave the general light to something softer overhead. It is a sensible choice for a home office or a studio where the light needs to be pointed at a task rather than spread thinly.
The black finish covers the housing and the moving head, so it reads as one shape against a dark ceiling. Keep it clean by switching the power off, letting the head cool and going over it with a dry cloth; nothing wet or abrasive near the lens. It carries a three year warranty. The rest of the range supplies the run itself: surface track in shallow and deep profiles, a recessed track, corner and wall to wall joints, and end caps, all in the same black.
Specification
| Colour |
Black |
| Weight |
0.35KG |
| Length |
200mm |
| Width |
100mm |
| Height |
120mm |
| Materials Used |
Aluminium |
| Energy Class |
G |
| Energy Class of Lamp |
Group A |
| Max Energy Class |
G |
| Min Energy Class |
G |
| Lamp Cap |
Integral LED |
| Recommended Lamp |
Integral LED |
| Lamp |
7W integrated LED (no lamps to fit) |
| Lamps Included |
Yes - Integrated |
| Colour Temperature |
3000K Warm White (±5%) |
| Number of Switching Cycles |
30000 |
| Average Life of LED |
30000hrs |
| LED Power |
7W (±5%) |
| Lumens per Watt (lm/W) |
80lm/W (±5%) |
| Beam Angle |
38° |
| System Flux |
560lm (±5%) |
| CRI |
>90 |
| Light Distribution |
Multiple Directions |
| Driver Included |
Yes |
| Type of Driver |
DC48V |
| Constant Voltage Output |
DC48V |
| Protection Class |
Class 1 - Earth Connection Required |
| Total Power Consumption |
7W (±5%) |
| Input Voltage |
48V |
| Dimmable |
No |
| IP Rating |
IP20 |
| Average Life |
30000hrs |
| Warranty |
3yrs |
| UKCA/CE |
Yes |
| TUV |
Yes |
| EMV/EMC |
Yes |
| Pieces Included |
1 |
| Installation |
Requires Installation By Qualified Electrician |
| Product Care |
(1) Wipe clean with a dry cloth, do not use any cleaning detergents, do not use rough or coarse material to clean. (2) Ensure light is not illuminated when cleaning. |
| Country of Origin |
China |
Frequently Asked
Can this be dimmed?
No, it runs at a fixed output. If you want dimming across a Magneto system, the range includes a Triac/push switch controller rated to 720W, one per system.
Do I need to buy track as well?
Yes. The head is designed to sit on Magneto track, which comes in 1m lengths as shallow surface, deep surface/pendant and recessed profiles, all in black.
What is the light like?
Warm white at 3000K with a colour rendering figure above 90, so skin tones, timber and paint colours look natural. The beam is 38 degrees, giving a defined pool rather than a broad spread.
Does it take a bulb?
No. The LED is integrated along with its driver, rated at an average life of 30,000 hours, so there is nothing to change.
How much space does one head take up on the track?
Each head measures 200mm long, 100mm wide and 120mm tall, and weighs 0.35kg, so several will sit comfortably along a single metre of track.
How should I clean it?
Turn the power off, let the head cool, then dust it with a soft dry cloth. Avoid solvents and cleaning sprays, particularly around the lens.