Description
The Luneth Large is a 500mm tall alabaster wall light built around a vertical rod of natural Spanish alabaster cradled in a brushed brass U-shaped backplate. The alabaster extends above and below the brass frame, with an integrated 12W 3000K LED running through the stone to backlight its full length. The brass body measures 120mm wide and acts as both reflector and structural support.
The vertical proportion suits hallways, stairwells, bedside positions and either side of a fireplace, vanity or headboard where a sculptural light source is wanted without the bulk of a traditional sconce. Mounted at standard switch-plate or eye-line height, the alabaster rod sits within reading-light range while the brass cup directs spill light back onto the wall, washing the surface in a warm halo around the fitting.
The body is solid copper finished in brushed brass, giving the lamp weight and a softer, less reflective tone than plated alternatives. The natural alabaster shows mineral veining and tonal variation along its length, so each rod looks slightly different when lit. The 60mm stone diameter keeps the silhouette slim against the wall, while the 500mm height gives the fitting enough vertical presence to anchor a hallway run or pair symmetrically across a bed or mirror.
Hard-wired to 230V mains with the LED integrated into the fitting, the Luneth Large needs no separate bulb and switches as a single light source. The 3000K colour temperature sits in warm white territory, pairing well with traditional and contemporary interiors without the cool cast of higher-Kelvin LEDs.
Specification
| Material |
Solid Copper & Natural Spanish Alabaster |
| Finish |
Brushed Brass & Soft White |
| Width |
120mm |
| Height |
500mm |
| Stone Diameter |
60mm |
| Lamp Socket |
Integrated LED |
| Colour Temperature |
3000K |
| Wattage |
12W |
| Voltage |
230V |
| Weight |
- |
| Warranty |
2 Year |
Frequently Asked
Does it need a separate bulb?
No. The 12W LED is integrated into the fitting and runs the length of the alabaster rod. There is no replaceable bulb to source separately, and the lamp wires directly into 230V mains.
Is the Luneth dimmable?
The integrated LED runs at 12W on 230V mains. Dimmer compatibility depends on the specific dimmer model, so please contact us before pairing with a dimmer to confirm.
Can it be installed in a bathroom?
No IP rating is specified for this fitting, so it should be treated as an indoor, non-bathroom light. Use it in hallways, bedrooms, living rooms, dining rooms and stairwells rather than zones that are exposed to moisture.
How is the alabaster cleaned?
Alabaster is porous and softer than marble. Wipe gently with a dry microfibre cloth, or a barely-damp cloth with distilled water for marks. Avoid household sprays, polishes and chemical cleaners, as these can stain or etch the stone.