Luna Arc Floor Lamp - Black Fabric Shade

The Luna is an arc floor lamp with a curved black metal stem that extends 1180mm horizontally from a circular weighted base, suspending a black fabric drum shade over a seating position or reading chair. The lamp takes a single E27 bulb (sold separately) inside the fabric shade, which diffuses the light and softens shadows for reading or ambient use.

Designed for living rooms, bedrooms and reading corners where overhead ceiling lights are impractical or absent, the Luna's arc arm places the light source directly over the area it needs to illuminate without requiring side-table space. The weighted 400mm-diameter base sits to one side of a sofa or armchair, with the arm reaching across to position the shade 1.5-1.8m above floor level. The 2250mm cable length allows the lamp to sit 2m or more from the nearest wall socket.

The black powder-coated metal frame gives the Luna a 5kg presence that keeps the arc stable when the shade is suspended at full extension. The fabric shade measures approximately 400mm in diameter and diffuses light through the weave, creating a soft pool of illumination below while preventing direct glare when seated beneath. The black finish pairs with monochrome, industrial and contemporary interiors, and the simple drum shade silhouette sits comfortably in both modern and more traditional rooms.

The lamp is rated IP20 for indoor use only and is not dimmable on standard installation. Ideal Lux backs the Luna with a 5-year warranty covering manufacturing defects in the metalwork and electrical components.

What bulb does the Luna take?

The lamp takes a standard E27 (Edison screw) bulb. Bulbs are sold separately. Most users pair this with a warm-white LED bulb between 8-12W and 2700K-3000K for comfortable reading light without excessive brightness.

Can the arc height be adjusted?

No. The arc is fixed at 1180mm horizontal projection from the base. The shade hangs at a set height determined by the curve of the arm and cannot be raised or lowered without modifying the frame.

Is the base heavy enough to prevent tipping?

Yes. The 400mm-diameter weighted base provides stability for the extended arm and suspended shade. The total lamp weight is approximately 5kg, with most of that mass concentrated in the base to counterbalance the arc.

Can it be used with a dimmer switch?

The specification states the lamp is not dimmable on standard installation. If you wish to dim the light, you would need to fit a dimmable E27 bulb and install a compatible trailing-edge dimmer on the mains circuit, but this is outside the manufacturer's standard specification.