Description
The Luna does two jobs from one ceiling point: a flat white LED light with a quiet DC fan built into the same body. Brightness and colour are both handled from the supplied handset, so the light slides from a soft warm tone in the evening to a clean cool one for working, without any change to the wiring. Opened out, the blades reach a 106cm span, while the shallow body keeps the whole fitting sitting tight to the ceiling.
We reach for this in bedrooms and living rooms where a pendant and a separate fan would leave the ceiling looking cluttered, and in rooms that get stuffy in summer but still need proper light the rest of the year. The handset makes it easy for anyone who would rather not cross a dark room to a switch, and the cooler end of the tuning range earns its keep over a desk or a dressing table. Because the head sits close to the plaster, it also works in rooms with modest ceiling height where a hanging fitting would be in the way.
The housing and blades are finished in the same plain white, which lets it settle quietly into a ceiling rather than draw the eye, and the LED sits behind a diffusing face so there is no bare glare from below. Keep it to dry rooms indoors; damp spaces such as a shower room are not its place. For cleaning, cut the power first, then run a dry cloth along the upper face of each blade, where dust collects unseen, and give the light face an occasional wipe. It carries a five year warranty. The LED is built in, so there is nothing to buy alongside it, and the white on white suits a room where the pattern and colour are already coming from elsewhere.
Specification
| Colour |
White |
| Weight |
5.00KG |
| Diameter |
490/1060mm |
| Height |
325/450mm |
| Materials Used |
Iron, ABS, PC, MS |
| Energy Class |
D |
| Energy Class of Lamp |
Group C |
| Max Energy Class |
D |
| Min Energy Class |
D |
| Lamp |
1 x 36W integrated LED (no lamps to fit) |
| Lamp Cap |
Integral LED |
| Recommended Lamp |
Integral LED |
| Colour Temperature |
3000 - 5000K Tuneable White (±5%) |
| Number of Switching Cycles |
10000 |
| LED Power |
36W (±5%) |
| Lumens per Watt (lm/W) |
159lm/W (±5%) |
| System Flux |
5710lm (±5%) |
| CRI |
>80 |
| Light Distribution |
Ambient |
| Driver Included |
Yes |
| Protection Class |
Class 1 - Earth Connection Required |
| Total Power Consumption |
64W (±5%) |
| Input Voltage |
220-240V~50/60Hz |
| Switch |
Yes - Remote Control |
| Dimmable |
Yes - Remote Control |
| Dimmer Included |
Yes - Remote Control |
| IP Rating |
IP20 |
| Average Life |
25000hrs |
| Warranty |
5yrs |
| UKCA/CE |
Yes |
| Remote Control Information |
R00236 |
| Pieces Included |
1 |
| Unassembled |
Yes-Requires Construction |
| Installation |
Requires Installation By Qualified Electrician |
| Sloped Ceiling Compatible |
No |
| Product Care |
(1) Wipe clean with a dry cloth, do not use any cleaning detergents, do not use rough or coarse material to clean. (2) Ensure light is not illuminated when cleaning. |
| Country of Origin |
China |
Frequently Asked
What colour temperatures does it give?
It tunes across the range from 3000K warm white to 5000K cool white, adjusted from the remote handset rather than at the wall.
How big is it?
The blades span 1060mm and the central body measures 490mm across, with an overall height of between 325mm and 450mm depending on configuration.
How is it dimmed?
Dimming is done through the supplied remote control, which also sets the colour temperature and the fan. No separate wall dimmer is needed.
Do I need to buy any bulbs?
No. The 36W LED is integrated, rated at around 5710 lumens with an average life of 25,000 hours.
Can it go in a bathroom?
No. It is rated IP20, which suits dry indoor rooms such as bedrooms, living rooms and studies.
How do I keep the blades clean?
Switch the power off, then wipe each blade with a dry or barely damp cloth, paying attention to the top surface where dust settles. Avoid solvent cleaners on the white finish.