Description
The LTL-E is a 24W linear track light measuring 1200mm long, built for three-phase track systems and known in the US as a track lighting head. It runs at 220-240V AC and delivers up to 2880 lumens, with colour selectable output across 3000K, 4000K and 6500K so the same fitting can read warm, neutral or cool. The asymmetric beam of 130 degrees by 105 degrees spreads light along a wide footprint rather than a tight spot, making it a linear washing head rather than a focused accent.
Its long, low-profile bar suits retail floors, galleries, studios and open-plan commercial interiors where light needs to follow a run of shelving, artwork or a worktop. Mounted on continuous track at ceiling height, several heads can be spaced and angled along the rail to grade light evenly across a wall or display. The wide 130 by 105 degree beam gives a soft, broad throw that fills the space between fittings instead of leaving scallops, so the coverage reads as a continuous band along whatever it is aimed at.
The body is polycarbonate in a white finish, weighing 356g and rated IP20 for dry indoor use, so keep it clear of damp or outdoor positions. It is not dimmable, and no driver is supplied as the head draws from the track feed, so specify a compatible three-phase track and connector. Rated for 50,000 hours with an Ra 80 colour rendering, it is built as part of the wider LTL-E range, which includes matching heads and track accessories for building out a full layout.
Specification
| Power |
24W |
| Voltage |
220-240 AC |
| Luminous flux |
2640(WW)/2880(NW)/2880(CW) lm |
| Colour temperature |
3000/4000/6500K |
| Colour rendering (CRI) |
Ra 80 |
| Beam angle |
X130/Y105° |
| IP rating |
IP20 |
| Dimmable |
No |
| Driver included |
No |
| Mounting |
Track Mounted |
| Lifespan |
50,000 hours |
| Dimensions |
1200 × 35 × 65 mm |
| Weight |
356 g |
| Material |
Polycarbonate |
| Finish |
White |
Downloads
Frequently Asked
What is track lighting and how does this head work?
Track lighting is a powered rail mounted to the ceiling that carries current along its length, with individual heads clipped on wherever light is needed. The LTL-E is one such head, drawing 24W from the track to put out up to 2880 lumens. It locks onto the rail and can be angled toward shelving, art or a worktop.
What track does it fit and can heads be moved later?
It mounts on a three-phase track system using a compatible connector. Heads can be added, removed or repositioned along the rail at any time, so the layout can change as a display or room is reconfigured without rewiring.
Can I switch the colour temperature?
Yes, the LTL-E is colour selectable across 3000K warm white, 4000K neutral white and 6500K cool white. This lets you match the tone to the setting, from a warm retail feel to a crisp neutral light for tasks and detail.
Can it be used outdoors or in a bathroom?
No. The LTL-E is rated IP20, which means dry indoor use only. Keep it out of bathrooms, damp utility areas and any outdoor or sheltered-outdoor position, as it has no protection against moisture or water ingress.