Description
Four smoke glass globes sit in a row along a slim satin nickel bar, each one open at the mouth so the lamp shows a little at the base. The tinted glass takes the edge off a bright lamp and gives a softer, warmer spill than clear glass would, while the surface itself picks up a quiet shine. Each drop adjusts on its own, so the globes can hang dead level for a formal look or be stepped slightly for something looser.
The bar measures 1.2m, which reads well over a long dining table, a kitchen island or a run of breakfast stools, and it spreads light along the surface rather than pooling it in one spot. We would hang it low enough for the light to land on the table without blocking the view across it, then leave the lamp choice to the room: clear lamps for sparkle, opal for a calmer glow. Each holder takes an E27 lamp up to 20W, and the fitting will dim if you pair suitable lamps with a compatible dimmer. Keep it to dry rooms indoors, away from bathroom zones and anywhere it might catch the weather.
The metalwork is finished in satin nickel, a soft brushed grey that sits easily beside stainless appliances and brushed taps. Care is simple enough: a dry duster along the bar and over the globes, and a barely damp cloth on the glass once the lamps have gone cold, drying off any smears as you go. It carries a one year warranty. We stock the same smoke globes elsewhere in the Lori range, on flush fittings in antique gold, so a hall or landing can pick up the theme without copying the dining light. Lamps are not included.
Specification
| Colour |
Satin Nickel |
| Second Colour |
Smoke |
| Weight |
4.70KG |
| Length |
1200mm |
| Width |
80mm |
| Minimum Drop |
270mm |
| Maximum Drop |
2270mm |
| Materials Used |
Iron, Steel,Glass |
| Adjustable Height |
Yes |
| Hanging Method |
Cable |
| Energy Class |
A++ to A |
| Max Energy Class |
A++ |
| Min Energy Class |
A |
| Lamp |
4 x E27 20W max (lamps not included) |
| Lamp Cap |
E27 |
| Recommended Lamp |
LED Lamp Dependant On Shade |
| Unassembled |
Yes-Shades To Be Attached |
| Installation |
Requires Installation By Qualified Electrician |
| Sloped Ceiling Compatible |
Yes |
| Sloped Ceiling Adapter Required |
No |
| Product Care |
(1) Wipe clean with a dry cloth, do not use any cleaning detergents, do not use rough or coarse material to clean. (2) Ensure light is not illuminated when cleaning. |
| Country of Origin |
China |
| Light Distribution |
Ambient |
| Protection Class |
Class 1 - Earth Connection Required |
| Total Power Consumption |
Dependent On Lamps Used (±5%) |
| Input Voltage |
220-240V~ 50/60Hz |
| Dimmable |
Yes - Suitable Lamps & Dimmer Required |
| Dimmer Included |
No |
| IP Rating |
IP20 |
| Warranty |
1yr |
| UKCA/CE |
Yes |
| Shade Colour |
Smoke |
| Plate Dimensions |
L:1200mm x W:80mm x T:1.0mm |
| Cable Information |
2 x 0.75mm clear double insulated round cord, L:2000mm |
| Shade Material |
Glass |
| Shade Included |
Yes |
| Number of Shades |
4 |
| Pieces Included |
1 |
Frequently Asked
How long is the bar, and how far down can the globes hang?
The bar runs 1200mm long, with globes of 80mm. The drop is adjustable from 270mm up to 2270mm, so it can sit close under the ceiling or come well down over a table.
Which lamps does it take?
It needs four E27 lamps, each up to 20W. LED is the sensible choice here, and because the globes are open at the mouth the lamp is partly on show, so pick one you are happy to look at. Lamps are supplied separately.
Can it be dimmed?
Yes, provided you fit dimmable lamps and use a compatible dimmer. No dimmer is supplied with the fitting.
Is it suitable for a bathroom or a covered outdoor area?
No. It is rated IP20 and belongs in dry indoor rooms such as dining rooms, kitchens and hallways.
How should the smoke glass be cleaned?
Switch off at the wall and let everything cool first. Dust with a dry cloth, then wipe the globes with a barely damp cloth and dry them straight away. Avoid sprays and abrasive creams, which dull the tint over time.
Is there a warranty?
It carries a one year warranty.