Description
Three slim curved trapezium shades in iridescent glass hang beneath a round satin nickel plate measuring 40cm across. The glass catches whatever light reaches it and shifts as you move past, so it reads as more than plain clear glass even when the fitting is switched off. Each shade takes an E27 lamp, and the drop is adjustable, so the shades can sit low over a table or be raised to 550mm below the ceiling.
We would hang this over a dining table or a kitchen island, where the shades spread light along a length rather than dropping it all in one place. It suits a hallway or a landing with a bit of height to give, and it is one we reach for when a single wide shade would feel too solid for the room. Lit, the glass casts light onto the surface below; unlit, it picks up daylight from a nearby window. It is dimmable if you pair suitable lamps with a dimmer, though neither the lamps nor the dimmer come with it.
The metalwork wears a satin nickel finish, a low sheen that keeps fingerprints and dust less obvious than a bright plated one would. For care, run a dry duster over the metal and use a cloth lightly damped with warm water on the shades, drying them off at once so the surface stays even; do this with the power off and the lamps cold. It carries a one year warranty. The Lori range runs wider than this pendant, with single light flush fittings in antique gold or polished chrome, shades in the same slim curved trapezium shape alongside round globe, dimple and wine forms, and iridescent glass among them. Lamps are not included.
Specification
| Colour |
Satin Nickel |
| Second Colour |
Iridescent |
| Weight |
4.20KG |
| Diameter |
500mm |
| Minimum Drop |
550mm |
| Maximum Drop |
2550mm |
| Materials Used |
Iron,Steel,Glass |
| Adjustable Height |
Yes |
| Hanging Method |
Cable |
| Energy Class |
A++ to A |
| Max Energy Class |
A++ |
| Min Energy Class |
A |
| Lamp |
3 x E27 20W max (lamps not included) |
| Lamp Cap |
E27 |
| Recommended Lamp |
LED Lamp Dependant On Shade |
| Light Distribution |
Ambient |
| Protection Class |
Class 1 - Earth Connection Required |
| Total Power Consumption |
Dependent On Lamps Used (±5%) |
| Input Voltage |
220-240V~ 50/60Hz |
| Dimmable |
Yes - Suitable Lamps & Dimmer Required |
| Dimmer Included |
No |
| IP Rating |
IP20 |
| Warranty |
1yr |
| UKCA/CE |
Yes |
| Shade Colour |
Iridescent |
| Plate Dimensions |
D:400mm x T:1.5mm |
| Cable Information |
2 x 0.75mm clear double insulated round cord, L:2000mm |
| Shade Material |
Glass |
| Shade Included |
Yes |
| Number of Shades |
3 |
| Pieces Included |
1 |
| Unassembled |
Yes-Shades To Be Attached |
| Installation |
Requires Installation By Qualified Electrician |
| Sloped Ceiling Compatible |
Yes |
| Sloped Ceiling Adapter Required |
No |
| Product Care |
(1) Wipe clean with a dry cloth, do not use any cleaning detergents, do not use rough or coarse material to clean. (2) Ensure light is not illuminated when cleaning. |
| Country of Origin |
China |
Frequently Asked
How far down does it hang?
The drop adjusts from 550mm at its shortest to 2550mm at its longest, so it can be set high in a standard room or taken well down over a table or stairwell.
What lamps should I use?
It takes three E27 lamps rated up to 20W each. LED lamps suit it best, and the shape you choose is worth matching to the shade so the lamp sits neatly within it.
Can I put it on a dimmer?
Yes, provided the lamps you fit are dimmable and you use a compatible dimmer switch. Neither the lamps nor the dimmer are supplied.
Will it work over a 1.2m dining table?
Yes. At 50cm across, the three shades line up well with a table of that size and keep the light spread across the surface rather than in one hot spot.
Is it suitable for a bathroom?
No. With an IP20 rating it is intended for dry rooms such as dining rooms, kitchens, hallways and bedrooms.
How much does it weigh?
Around 4.2kg with the shades in place and before lamps are fitted.