Description
A slim satin nickel bar holds three smoke globes in a straight line, each hung on its own adjustable suspension. The shades are open at the mouth, so the lamp sits just inside the rim and light falls straight down as well as glowing through the tinted walls. The bar runs 850mm end to end, long enough to cover a compact island or the middle stretch of a dining table without looking overscaled. Each drop can be shortened for a low ceiling or let down where the room has height.
We reach for a linear pendant like this where one central light would leave the ends of a table or worktop in shadow. Three separate pools of light do the job better, and the smoke tint takes the hard edge off the glare when you are sitting beneath it. Each holder takes an E27 lamp, and we would choose a warm white LED globe with a visible filament, since an open shade shows most of what is inside it. It will dim, given lamps and a dimmer chosen to match.
The metalwork is finished in satin nickel, a soft grey sheen that sits quietly against pale and dark cabinetry alike, and the smoke shades read darker unlit than they do once the lamps are on. Keep it looking well by dusting the globes with a dry microfibre cloth, leaving the lamps to go cold first, and keep household sprays away from the nickel. Lamps are not included. It carries a one year warranty. The same open mouth globe turns up elsewhere in the Lori range on single light flush fittings, in antique gold and polished chrome, if you want the ceilings either side of a kitchen to follow the same line.
Specification
| Colour |
Satin Nickel |
| Second Colour |
Smoke |
| Weight |
3.30KG |
| Length |
850mm |
| Width |
80mm |
| Minimum Drop |
270mm |
| Maximum Drop |
2270mm |
| Materials Used |
Iron, Steel,Glass |
| Adjustable Height |
Yes |
| Hanging Method |
Cable |
| Energy Class |
A++ to A |
| Max Energy Class |
A++ |
| Min Energy Class |
A |
| Lamp |
3 x E27 20W max (lamps not included) |
| Lamp Cap |
E27 |
| Recommended Lamp |
LED Lamp Dependant On Shade |
| Light Distribution |
Ambient |
| Protection Class |
Class 1 - Earth Connection Required |
| Total Power Consumption |
Dependent On Lamps Used (±5%) |
| Input Voltage |
220-240V~ 50/60Hz |
| Dimmable |
Yes - Suitable Lamps & Dimmer Required |
| Dimmer Included |
No |
| IP Rating |
IP20 |
| Warranty |
1yr |
| UKCA/CE |
Yes |
| Shade Colour |
Smoke |
| Plate Dimensions |
L:850mm x W:80mm x T:1.0mm |
| Cable Information |
2 x 0.75mm clear double insulated round cord, L:2000mm |
| Shade Material |
Glass |
| Shade Included |
Yes |
| Number of Shades |
3 |
| Pieces Included |
1 |
| Unassembled |
Yes-Shades To Be Attached |
| Installation |
Requires Installation By Qualified Electrician |
| Sloped Ceiling Compatible |
Yes |
| Sloped Ceiling Adapter Required |
No |
| Product Care |
(1) Wipe clean with a dry cloth, do not use any cleaning detergents, do not use rough or coarse material to clean. (2) Ensure light is not illuminated when cleaning. |
| Country of Origin |
China |
Frequently Asked
How long is the bar, and how far down does it hang?
The bar measures 850mm from end to end and each globe is 80mm wide. The drop is adjustable from 270mm up to 2270mm, so it can sit close under a standard ceiling or hang low over a table in a room with height.
What lamps should I use?
Three E27 lamps, each up to 20W. LED is the sensible choice, and because the shade is open at the mouth a decorative globe or filament lamp looks best.
Can I put it on a dimmer?
Yes, provided both the lamps and the dimmer are chosen for the job. Neither the lamps nor a dimmer module come with it.
Is it suitable for a bathroom?
No. It is rated IP20, which makes it a fitting for kitchens, dining rooms, hallways and living spaces rather than anywhere it might meet splashes or steam.
How do I clean the smoke shades?
Switch off at the wall and let the lamps cool, then use a dry or barely damp microfibre cloth. Avoid solvents and abrasive creams, which can dull both the tint and the nickel.
How much does it weigh?
It weighs 3.3kg complete, before lamps.