Description
A neat pair of over-cabinet lights, each with a satin nickel body and a head that tilts so you can aim the light where it is wanted. Every unit takes a GU10 lamp and runs on its own over-cabinet light, 2m long and supplied without a plug fitted. Each head moves on its own, so one can wash a worktop while the other picks out a shelf above. There is no switch on the fitting, so the light comes on with whatever controls the supply.
They earn their keep above kitchen wall units, along the top of a dresser or bookcase, and inside a glazed cabinet where a shelf of china or glass wants picking out. A study with open shelving is another good home for them, as is the back of a bar or a deep alcove. With dimmable lamps and a compatible dimmer the level can be brought down. We reach for these where nothing can hang and the light has to come from just above the surface it falls on.
The body and adjustable head carry a satin nickel finish, a soft grey sheen that sits quietly against oak, painted timber and stainless steel. It is double insulated throughout, and it belongs indoors where the air stays dry rather than in a shower room or a porch. To keep the finish even, run a dry cloth over the head and stem from time to time with the power off, and keep polishes and sprays away from the lamp aperture. It carries a one year warranty. We stock the same fitting in black and in brass, and a second head style runs across all three finishes, so a kitchen and a study can be kept in step without matching exactly. Lamps are not included.
Specification
| Colour |
Satin Nickel |
| Weight |
0.34KG |
| Length |
570mm |
| Width |
60mm |
| Height |
175mm |
| Materials Used |
Iron |
| Energy Class |
A++ to A |
| Max Energy Class |
A++ |
| Min Energy Class |
A |
| Lamp |
1 x GU10 10W max (lamps not included) |
| Lamp Cap |
GU10 |
| Recommended Lamp |
LED (50mm Reflector) |
| Light Distribution |
Down |
| Protection Class |
Class 2 - Double Insulated |
| Total Power Consumption |
Dependent On Lamps Used (±5%) |
| Input Voltage |
220-240~50/60HZ |
| Switch |
Not Switched |
| Dimmable |
Yes - Dimmable Lamps Required |
| Dimmer Included |
No |
| IP Rating |
IP20 |
| Warranty |
1yr |
| UKCA/CE |
Yes |
| Pieces Included |
2 |
| Unassembled |
No |
| Installation |
Requires Installation By Qualified Electrician |
| Product Care |
(1) Wipe clean with a dry cloth, do not use any cleaning detergents, do not use rough or coarse material to clean. (2) Ensure light is not illuminated when cleaning. |
| Country of Origin |
China |
Frequently Asked
What lamp does each light take?
A GU10 lamp, up to 10W. An LED reflector of 50mm diameter is the sensible choice. Lamps are not supplied.
How many lights are in the set?
Two, each with its own adjustable head and its own 2m over-cabinet light.
Is a plug fitted to the over-cabinet light?
No. The 2m over-cabinet light is supplied without a plug.
Can these be dimmed?
Yes, provided you use dimmable GU10 lamps with a compatible dimmer. No dimmer is included, and there is no switch on the fitting itself.
Are they suitable for a bathroom?
No. They are rated IP20 and intended for dry indoor rooms such as kitchens, studies and living rooms.
How should the satin nickel be cleaned?
A soft dry cloth over the head and stem, with the power off. Avoid abrasive creams, solvents and aerosol polishes near the lamp aperture.