Description
A pair of slim over-cabinet lights, each with a head that tilts and turns so the light can be aimed along a shelf or down onto a worktop rather than sitting fixed. The body is low and black, the flex leaves the back, and each head takes a GU10 lamp. We would fit an LED reflector lamp here, and a dimmable one if you want the light on a dimmer, since the fitting itself has no switch.
These are the lights we suggest for the top of a kitchen run, a dresser, a glazed display cupboard or a set of open shelves in a study, where the light needs to sit above the object and point at it. Two metres of flex on each gives some freedom in where the power comes from, and no plug is fitted. Because they come as a set, a long cabinet can be lit from both ends, while a shorter one leaves you a spare for elsewhere.
It is double insulated, and the black finish keeps the fitting quiet against a cabinet top or a shelf edge, which matters more here than on a light you look at directly. Dust settles on cabinet tops, so switch off at the socket, let the lamp lose its heat, then take a dry cloth to the head and the lens; sprays and solvents are best kept away from the finish. Keep it to dry rooms indoors, away from steam and splashes. We stock the pair in brass and satin nickel as well as black, and there is another body type in the range. It carries a one year warranty, and lamps are not included.
Specification
| Colour |
Black |
| Weight |
0.34KG |
| Length |
570mm |
| Width |
60mm |
| Height |
175mm |
| Materials Used |
Iron |
| Energy Class |
A++ to A |
| Max Energy Class |
A++ |
| Min Energy Class |
A |
| Lamp |
1 x GU10 10W max (lamps not included) |
| Lamp Cap |
GU10 |
| Recommended Lamp |
LED (50mm Reflector) |
| Light Distribution |
Down |
| Protection Class |
Class 2 - Double Insulated |
| Total Power Consumption (W) |
Dependent On Lamps Used (±5%) |
| Input Voltage (V) |
220-240~50/60HZ |
| Switch |
Not Switched |
| Dimmable |
Yes - Dimmable Lamps Required |
| Dimmer Included |
No |
| IP Rating |
IP20 |
| Warranty |
1yr |
| UKCA/CE |
Yes |
| Pieces Included |
2 |
| Unassembled |
No |
| Installation |
Requires Installation By Qualified Electrician |
| Product Care |
(1) Wipe clean with a dry cloth, do not use any cleaning detergents, do not use rough or coarse material to clean. (2) Ensure light is not illuminated when cleaning. |
| Country of Origin |
China |
Frequently Asked
What lamp does each light take?
A GU10 lamp of up to 10W. An LED reflector of 50mm diameter is the recommended choice, and lamps are supplied separately.
Can the light be dimmed?
Yes, provided you use dimmable GU10 lamps and a suitable dimmer. Neither the lamps nor a dimmer are included, and there is no switch on the fitting itself.
How long is the cable?
Each light has 2m of flex. It is supplied without a plug fitted.
How many lights come in the pack?
Two, both in the black finish, so a cabinet or shelf run can be lit from either end.
What size is each light?
Each measures 570mm long, 175mm high and 60mm wide, and weighs 0.34kg.
How should I clean them?
Switch off first and allow the lamp to cool, then wipe the head and lens with a dry cloth. Avoid sprays, solvents and abrasive pads on the black finish.