Description
A pair of slim over-cabinet lights, each holding a single GU10 lamp in a head that tilts so the beam can be aimed exactly where it is wanted. The satin nickel finish carries a soft grey sheen that settles quietly beside oak, walnut and painted timber. Each unit is compact and low in profile, reading more as neat hardware than as a light in its own right. A 2m over-cabinet light trails from each fitting, and there is no switch on the body itself, so control comes from whatever switches the circuit.
We use these where the top of a cabinet, a bookcase or a run of tall kitchen units needs a low wash of light rather than another fitting overhead. They also work aimed up a wall to soften a dark corner, or tucked behind glazing to pick out china and books. Since each head takes a small reflector lamp of up to 10W, the beam stays contained, and dimming is possible where the lamps chosen are dimmable. Used together, they can sit at either end of a long shelf and share the work between them.
Both fittings are double insulated and intended for dry rooms indoors, kitchens and living spaces rather than bathrooms or anywhere prone to damp. For cleaning, wait until the head has cooled, wipe it with a barely damp cloth and dry it straight away; abrasive creams will dull satin nickel. It carries a one year warranty. We stock the same set in black and in brass, and the range runs to a second head style if you prefer a different profile. Lamps and a plug are not supplied.
Specification
| Colour |
Satin Nickel |
| Weight |
0.31KG |
| Length |
535mm |
| Width |
60mm |
| Height |
173mm |
| Materials Used |
Iron |
| Energy Class |
A++ to A |
| Max Energy Class |
A++ |
| Min Energy Class |
A |
| Lamp |
1 x GU10 10W max (lamps not included) |
| Lamp Cap |
GU10 |
| Recommended Lamp |
LED (50mm Reflector) |
| Light Distribution |
Down |
| Protection Class |
Class 2 - Double Insulated |
| Total Power Consumption |
Dependent On Lamps Used (±5%) |
| Input Voltage |
220-240~50/60HZ |
| Switch |
Not Switched |
| Dimmable |
Yes - Dimmable Lamps Required |
| Dimmer Included |
No |
| IP Rating |
IP20 |
| Warranty |
1yr |
| UKCA/CE |
Yes |
| Pieces Included |
2 |
| Unassembled |
No |
| Installation |
Requires Installation By Qualified Electrician |
| Product Care |
(1) Wipe clean with a dry cloth, do not use any cleaning detergents, do not use rough or coarse material to clean. (2) Ensure light is not illuminated when cleaning. |
| Country of Origin |
China |
Frequently Asked
How many lights are in the set?
Two identical fittings, each with one GU10 lamp holder and its own 2m over-cabinet light.
Which lamp suits it best?
A GU10 LED reflector lamp of 50mm diameter, rated up to 10W.
Can the light be dimmed?
Yes, as long as the GU10 lamps you fit are dimmable and a suitable dimmer is used. No dimmer is included.
How big is each fitting?
Each measures 535mm long, 60mm wide and 173mm high, and weighs 0.31kg.
Is there a switch on the fitting itself?
No, they are unswitched, and the 2m over-cabinet light comes without a plug fitted.
Can they go in a bathroom?
No. They are IP20 rated, so they belong in dry indoor rooms only.