Description
The Laurin 340x70 3I G W is a round LED ceiling light carrying three GU10 spotlight heads, each rated at up to 10W from a 220-240V AC supply. As a flush mount led ceiling light, it sits close to the surface while the three heads let you angle the output across a room. Light source is PAR16 lamps in GU10 caps, so the tone and brightness depend on the bulbs you fit. The round form measures 335 x 70 x 108 mm and combines a white body with gold detailing.
The three adjustable heads make this a flexible choice for hallways, landings and living areas where you want to direct light onto specific zones such as a seating corner or a piece of artwork. It suits standard ceiling heights and works well as general or accent lighting depending on how the heads are aimed. Coverage scales with the GU10 lamps chosen, so brighter or warmer bulbs can be matched to the mood of the space. With an IP20 rating it is intended for dry indoor rooms only, not bathrooms, porches or any damp or outdoor location.
Built from aluminium alloy, the fitting is finished in white with gold accents for a clean two-tone look. It mounts to the wall or ceiling and takes three GU10 PAR16 lamps, which are specified separately so you can pick the wattage and colour temperature to suit. Dimmability follows the bulbs and any control fitted. At 810 g it is light enough for straightforward installation on a standard ceiling box.
Specification
| Power |
3 x max 10W |
| Voltage |
220-240 AC |
| IP rating |
IP20 |
| Mounting |
Wall Mounted, Ceiling Mounted |
| Cap / base |
GU10 |
| Light source |
PAR16 |
| Shape |
Round |
| Dimensions |
335 × 70 × 108 mm |
| Weight |
810 g |
| Material |
Aluminium Alloy |
| Finish |
White / Gold |
Downloads
Product Specification Sheet
Range Datasheet
Frequently Asked
How much light does it give and what room size does it suit?
Output depends on the three GU10 PAR16 lamps you fit, each rated up to 10W. With suitable bulbs it works well in hallways, landings and medium living spaces, and the angled heads let you concentrate light where it is needed.
Can the spotlights be dimmed?
Dimming is determined by the GU10 lamps you install and the dimmer used. Fit dimmable GU10 bulbs and pair them with a compatible trailing-edge dimmer to vary the brightness.
Does it use replaceable bulbs?
Yes. It takes three GU10 PAR16 lamps rather than an integrated LED, so you can choose the wattage and colour temperature and replace each bulb individually as needed.
How do I clean it?
Switch off the power and let the lamps cool, then wipe the aluminium body and heads with a soft, dry or slightly damp cloth. Avoid solvents so the white and gold finish stays intact.