Description
Trimless downlights are for people who would rather see the light than the fitting, and this is one of the plainest we sell. The white body sits in a 62mm cut-out and leaves no bezel or ring on show, so a ceiling reads as a clean surface with a small circle of light in it. It takes a GU10 lamp of up to 12W, and it is not dimmable, so plain switching is the way to run it.
We reach for these where a run of spots needs to vanish into the ceiling: kitchens, hallways, landings, bedrooms and studies, or over a bookcase where a pendant would only be in the way. The small face suits narrow spaces and lower ceilings, and the fitting sits well in modern schemes where skirting boards, switch plates and sockets have all been kept quiet. We would choose a warm reflector lamp for living rooms and a cooler one over a worktop. Keep them to dry rooms indoors; a shower zone or an open porch calls for a sealed fitting instead.
The body is light in the hand and double insulated, with a holder that accepts any standard GU10 lamp. The white finish is even across the visible face, and upkeep amounts to a wipe with a dry cloth once the lamp has cooled, keeping cleaners and sprays away from the holder itself. It carries a one year warranty. We also stock the same downlight in black, which is the one we pick out for darker ceilings, and both finishes sit happily in the same room if a scheme calls for it. Lamps are not included.
Specification
| Colour |
White |
| Ceiling Mountable |
Yes |
| Recessable |
Yes |
| Weight |
0.12KG |
| Width |
105mm |
| Height |
34mm |
| Cut Out |
62mm |
| Materials Used |
Aluminium |
| Energy Class |
A++ to E |
| Max Energy Class |
A++ |
| Min Energy Class |
E |
| Lamp |
1 x GU10 12W max (lamps not included) |
| Lamp Cap |
GU10 |
| Recommended Lamp |
LED (50mm Reflector) |
| Light Distribution |
Down |
| Protection Class |
Class 2 - Double Insulated |
| Total Power Consumption |
Dependent On Lamps Used (±5%) |
| Input Voltage |
100-240V~50/60Hz |
| Dimmable |
No |
| IP Rating |
IP20 |
| Warranty |
1yr |
| UKCA/CE |
Yes |
| Pieces Included |
1 |
| Unassembled |
No |
| Installation |
Requires Installation By Qualified Electrician, Requires Installation Before Plastering |
| Sloped Ceiling Compatible |
No |
| Product Care |
(1) Wipe clean with a dry cloth, do not use any cleaning detergents, do not use rough or coarse material to clean. (2) Ensure light is not illuminated when cleaning. |
| Country of Origin |
China |
Frequently Asked
What size aperture does this downlight need?
It is made for a 62mm cut-out. The fitting itself measures 105mm across the widest point of the body, with a depth of 34mm behind the ceiling line.
Which lamp should I use with it?
A GU10 lamp rated no higher than 12W. An LED reflector lamp with a 50mm face is the best match for the housing, and lamps are bought separately.
Can it be dimmed?
No. This one is non-dimmable, so it should be wired to standard on/off switching rather than a dimmer plate.
Is it suitable for a bathroom?
It is rated IP20, which means dry indoor rooms only. For bathrooms and shower areas, choose a downlight with a moisture rating appropriate to the zone.
How do I keep it clean?
Switch off at the wall and let the lamp go cold, then dust the visible face with a soft dry cloth. Avoid solvents, polishes and any liquid near the lamp holder.
Is there a warranty?
Yes, it carries a one year warranty.