Description
The front face is a plain black square, and behind it the funnel sits at 45 degrees, so the beam leaves at an angle instead of dropping straight down. That makes it useful anywhere you want light pushed towards a surface rather than onto the floor below. It takes a GU10 lamp, the lampholder is already fitted, and the square face measures 93mm across. Nothing about it asks for attention: the dark recess keeps the glare tucked well back inside the trim.
We reach for angled spotlights like this in kitchens, where a row of them can wash a worktop or a splashback from the side rather than from directly above. They work just as well over a bookcase, aimed at a picture, or in a hallway where light bounced off a wall is kinder than light overhead. Pick a lamp up to 12W and you can set the brightness and colour temperature to suit the room. Dimming is possible, but it needs a dimmable lamp and a suitable dimmer, neither of which comes with it.
The black finish runs across the visible edge and down into the funnel, so the two read as one piece and the lamp stays the brightest thing on show. It is very light in the hand and carries a two year warranty. For cleaning, turn the power off, wait until the lamp is cold, then wipe the square edge with a dry cloth and take a soft brush round the inner funnel; polishes and solvents will mark the finish. Keep it to dry rooms, so hallways, living rooms and kitchens rather than anywhere near a shower. We stock the same angled funnel in white, the round version in both black and white, and centre-facing and flush options if you would rather the light fell vertically. Lamps are sold separately.
Specification
| Colour |
Black |
| Ceiling Mountable |
Yes |
| Wall Mountable |
Yes |
| Weight |
0.04KG |
| Length |
93mm |
| Width |
93mm |
| Height |
69mm |
| Cut Out |
85mm |
| Materials Used |
Polycarbonate |
| Energy Class |
A++ to B |
| Max Energy Class |
A++ |
| Min Energy Class |
B |
| Lamp |
1 x GU10 12W max (lamps not included) |
| Lamp Cap |
GU10 |
| Recommended Lamp |
LED (50mm Reflector) |
| Light Distribution |
Down |
| Protection Class |
Class 2 - Double Insulated |
| Total Power Consumption |
Dependent On Lamps Used (±5%) |
| Input Voltage |
100-240V~50/60Hz |
| Dimmable |
Yes - Dimmable Lamps Required |
| Dimmer Included |
No |
| IP Rating |
IP20 |
| Warranty |
2yrs |
| UKCA/CE |
Yes |
| Pieces Included |
1 |
| Installation |
Requires Installation By Qualified Electrician |
| Sloped Ceiling Compatible |
Yes |
| Sloped Ceiling Adapter Required |
No |
| Product Care |
(1) Wipe clean with a dry cloth, do not use any cleaning detergents, do not use rough or coarse material to clean. (2) Ensure light is not illuminated when cleaning. |
| Country of Origin |
China |
Frequently Asked
What size is the aperture?
The aperture measures 85mm, with a 93mm square outer face and a depth of 69mm behind it.
Which lamp should I choose?
A GU10 LED with a 50mm reflector body is the one we would pick, rated at up to 12W.
Can I dim it?
Yes, provided you fit a dimmable GU10 lamp and pair it with a compatible dimmer. Neither is supplied.
How far off vertical does the light point?
The funnel is fixed at 45 degrees, so the beam is thrown well to one side rather than straight down.
Is it suitable for a bathroom?
No. It is rated IP20 and should be kept to dry interior rooms.
How do I keep the black finish looking right?
A dry cloth on the outer edge and a soft brush inside the funnel, with the power off and the lamp cold. Avoid sprays and abrasives.