Description
A plain round downlight with a matt white trim, made to sit within the ceiling line and give light without pulling the eye upward. The face measures 10cm across and drops into an 85mm cut-out, so the ring of trim around the aperture stays slim. It takes a GU10 lamp of up to 12W, and we would fit an LED reflector here for the low running cost. There is no dimming on this one: it works from an ordinary switch, on or off.
It is the sort of fitting you buy several of at once. Repeated across a kitchen ceiling it lifts worktops and floors evenly; in a hallway or on a landing a short run of them keeps the ceiling clear where a pendant would hang too low. It is also a sensible choice for a bedroom or a study, where a tighter reflector lamp lets you aim light at a desk or a reading chair rather than washing the whole room. Being rated for dry indoor rooms, we would keep it out of a shower zone and away from anywhere that steams up badly.
The trim is finished in a flat, chalky white that settles into a painted ceiling rather than standing out, with none of the sparkle a polished ring throws back. Keep it clean by wiping the face with a barely damp cloth, and leave it be until the lamp has gone cold. It is double insulated, and it carries a one year warranty. We stock the same round shape in a wider size with a larger cut-out, so the look can be matched from room to room where spacing calls for something bigger. Lamps are not included.
Specification
| Colour |
Matt White |
| Ceiling Mountable |
Yes |
| Wall Mountable |
Yes |
| Recessable |
Yes |
| Weight |
0.10KG |
| Diameter |
100mm |
| Height |
52mm |
| Cut Out |
85mm |
| Materials Used |
PC |
| Energy Class |
A++ to E |
| Max Energy Class |
A++ |
| Min Energy Class |
E |
| Lamp |
1 x GU10 12W max (lamps not included) |
| Lamp Cap |
GU10 |
| Recommended Lamp |
LED (50mm Reflector) |
| Light Distribution |
Down |
| Protection Class |
Class 2 - Double Insulated |
| Total Power Consumption |
Dependent On Lamps Used (±5%) |
| Input Voltage |
100-240V~50/60Hz |
| Dimmable |
No |
| IP Rating |
IP20 |
| Warranty |
1yr |
| UKCA/CE |
Yes |
| Pieces Included |
1 |
| Unassembled |
No |
| Installation |
Requires Installation By Qualified Electrician |
| Sloped Ceiling Compatible |
Yes |
| Sloped Ceiling Adapter Required |
No |
| Product Care |
(1) Wipe clean with a dry cloth, do not use any cleaning detergents, do not use rough or coarse material to clean. (2) Ensure light is not illuminated when cleaning. |
| Country of Origin |
China |
Frequently Asked
What size hole does it need?
It is designed for an 85mm cut-out. The visible face is 100mm in diameter, so it covers the aperture with a slim margin all round.
How deep is the fitting?
The body stands 52mm tall behind the trim.
Which lamp should I use?
A GU10 lamp rated at no more than 12W. An LED with a 50mm reflector is the usual choice and gives a controlled beam rather than a broad spill.
Can I put it on a dimmer?
No. This version is non-dimmable and should be run from a standard on/off switch.
Is it suitable for a bathroom?
It is rated IP20, so it belongs in dry rooms rather than in bathroom or shower zones.
How do I clean the trim without marking it?
Wait until the lamp is cold, then wipe the white face with a soft cloth, barely damp if there are marks. Avoid solvents and cream cleaners, which can dull a matt finish.