Free Delivery on all orders over £99*

Knightsbridge 3W LED Square Brick Light - Grey IP44

£2799
The RRP is the manufacturer's recommended retail price of the item.
Limited Stock
We are an Independent UK Company
Price match. Found it cheaper? Contact us
Trade Discount Available
Description

The Knightsbridge LWS2G is a 3W LED square brick light with a grey powder-coated die-cast aluminium body and a recessed aperture that casts warm 3500K light downwards and outwards in a 165-degree beam. The integrated LED runs directly from 230V mains with no separate driver required, and the IP44 rating protects against splashing water from any direction.

Designed for surface mounting on exterior walls, garden boundaries, steps and pathways, the LWS2G provides low-level guide lighting without creating glare. The 105mm square faceplate sits 28mm proud of the wall, with the LED recessed behind a clear diffuser that directs light down onto the ground or along a path edge. The Class II double-insulated construction means no earth connection is required during installation.

The grey powder-coated finish on the aluminium housing resists corrosion in outdoor conditions and pairs with contemporary render, brick, stone and composite cladding. The 160-lumen output provides sufficient wayfinding light for garden paths, patio edges and stepped access without overpowering adjacent planting or seating areas. The LED is rated for 60,000 hours to L70 (the point at which output drops to 70% of initial), equating to over 20 years at typical dusk-to-dawn outdoor use.

Specification
Height 105 mm
Width 105 mm
Projection 28 mm
Construction Die-cast aluminium
Finish Grey
Class II
IP Rating IP44
Primary Voltage 230V 50Hz
Diffuser Clear
Lamp Technology LED
Lamp Included Yes
Dimmable No
L70B50 60000
Energy Rating (Class) post 2021 SLR G
Beam Angle 165
CCT 3500 K
Light Colour White
Lumens 160 lm
Lumens (Light Source only) 270 lm
Wattage 3
Efficacy 78.04 lm/W
CRI >80
Warranty 3
Frequently Asked

Can this be used indoors as well as outdoors?

Yes. The IP44 rating makes it suitable for bathrooms, hallways, staircases and any interior location where moisture resistance is beneficial, as well as all outdoor locations protected from direct water jets.

Does it need a separate driver or transformer?

No. The integrated LED runs directly from 230V mains with AC drive circuitry built into the fitting, so no separate driver box or transformer is required.

How is it mounted?

Surface-mounted to the wall using fixings through the rear of the aluminium body. The 28mm projection means it sits slightly proud of the wall surface with the LED recessed behind the faceplate.

Is it dimmable?

No. The LED driver circuitry is non-dimmable and will not respond to dimmer switches.

Shipping & Returns

Delivery UK delivery is £14.99, and delivery is free on all orders of £99 or more, in the UK and internationally.

Returns If you change your mind, you have 14 days from delivery to tell us, and a further 14 days to send the goods back. Return postage for a change-of-mind return is paid by you. Change-of-mind returns are subject to an inspection and handling deduction. See our full returns policy.

To arrange a return, call us on 020 8149 5199 or use our contact page.

See it lit, in person

Lighting looks different in a real room. Come and see our range at our showrooms in Birmingham, Hong Kong and Dubai, or talk to our design team wherever you are.

Niori lighting showroom trailer video with closeups of alabaster lighting

Why Niori

Over 20 years lighting homes worldwide

We are a specialist lighting and mirror retailer with showrooms in Birmingham, Hong Kong and Dubai, shipping to customers around the world. Our own design team is here to help, from first idea to final fitting.

Genuine products

An authorised stockist

Every product arrives brand new with the full manufacturer warranty. Found it cheaper elsewhere? Ask us about a price match.

Installation

Built for outdoors

Weather-rated for outdoor use, so it stands up to the British climate.

Light source

Integrated LED

Energy-efficient integrated LED, ready to install with no bulbs to buy.

Ordering with us

Free delivery over £99

Free delivery on orders over £99, in the UK and worldwide. Easy returns within 14 days, subject to our returns policy. Full manufacturer warranty included.

Design help

Not sure what you need?

Our design team can help you plan your lighting, share photos and videos of stock, and send samples worldwide. Book a showroom visit in Birmingham, Hong Kong or Dubai, or ask about our lighting design service.

Our Reviews

From first click to final installation, our customers share how Niori lights up their spaces. Read their words and envision what’s possible for yours.

Featured Projects

Step into our portfolio and see how we transform homes, restaurants, and commercial spaces and more, worldwide. Click here for a closer look at our latest projects.

Description

The Knightsbridge LWS2G is a 3W LED square brick light with a grey powder-coated die-cast aluminium body and a recessed aperture that casts warm 3500K light downwards and outwards in a 165-degree beam. The integrated LED runs directly from 230V mains with no separate driver required, and the IP44 rating protects against splashing water from any direction.

Designed for surface mounting on exterior walls, garden boundaries, steps and pathways, the LWS2G provides low-level guide lighting without creating glare. The 105mm square faceplate sits 28mm proud of the wall, with the LED recessed behind a clear diffuser that directs light down onto the ground or along a path edge. The Class II double-insulated construction means no earth connection is required during installation.

The grey powder-coated finish on the aluminium housing resists corrosion in outdoor conditions and pairs with contemporary render, brick, stone and composite cladding. The 160-lumen output provides sufficient wayfinding light for garden paths, patio edges and stepped access without overpowering adjacent planting or seating areas. The LED is rated for 60,000 hours to L70 (the point at which output drops to 70% of initial), equating to over 20 years at typical dusk-to-dawn outdoor use.

Specification
Height 105 mm
Width 105 mm
Projection 28 mm
Construction Die-cast aluminium
Finish Grey
Class II
IP Rating IP44
Primary Voltage 230V 50Hz
Diffuser Clear
Lamp Technology LED
Lamp Included Yes
Dimmable No
L70B50 60000
Energy Rating (Class) post 2021 SLR G
Beam Angle 165
CCT 3500 K
Light Colour White
Lumens 160 lm
Lumens (Light Source only) 270 lm
Wattage 3
Efficacy 78.04 lm/W
CRI >80
Warranty 3
Frequently Asked

Can this be used indoors as well as outdoors?

Yes. The IP44 rating makes it suitable for bathrooms, hallways, staircases and any interior location where moisture resistance is beneficial, as well as all outdoor locations protected from direct water jets.

Does it need a separate driver or transformer?

No. The integrated LED runs directly from 230V mains with AC drive circuitry built into the fitting, so no separate driver box or transformer is required.

How is it mounted?

Surface-mounted to the wall using fixings through the rear of the aluminium body. The 28mm projection means it sits slightly proud of the wall surface with the LED recessed behind the faceplate.

Is it dimmable?

No. The LED driver circuitry is non-dimmable and will not respond to dimmer switches.

Shipping & Returns

Delivery UK delivery is £14.99, and delivery is free on all orders of £99 or more, in the UK and internationally.

Returns If you change your mind, you have 14 days from delivery to tell us, and a further 14 days to send the goods back. Return postage for a change-of-mind return is paid by you. Change-of-mind returns are subject to an inspection and handling deduction. See our full returns policy.

To arrange a return, call us on 020 8149 5199 or use our contact page.